| NTN CRTD7612 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:38.1 mm; da max.:43.4 mm; Basic static load rating C0:375 kN; rb max.:1 mm; b:4.8 mm; b1:5 mm; dk:54.737 mm; Basic dynamic load rating C:125 kN; Design (sliding contact surface combination):Steel/steel; M:4 mm; da min.:41.4 mm; Mass plain bearing:0.42 kg; B:33.325 mm; r2 min.:1 mm; Da min.:52.3 mm; α:6 °; Specific static load factor K0:300 N/mm²; Lubricant:Regular relubricatio; Material constant KM:330; |
| 829744 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1 max.:0.8 mm; Lw:29.8 mm; Mass needle roller:2.94 g; r1,2 min.:0.3 mm; r2 max.:1 mm; Dw:4 mm; |
| 516225Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1:65 mm; B:55 mm; D:55 mm; B1:5 mm; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; Mass bushing:0.3 kg; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; d:45 mm; Coefficient of friction µ max.:0.1; |
| FAG 530739 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Speed Rating n2:3400 rpm; D:215.0000 mm; B:42.00 mm; Fillet Radius ra:2.00 mm; d:120.000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:119000 N; Basic Static Radial Load Rating Co:53000 N; |
| NTN CRTD6001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Appropriate attachment bolt size G:0.625 in; H:147.637 mm; R2:15.875 mm; h:30.163 mm; P120°:17.8 kN; H1:76.2 mm; A2:114.3 mm; P90°:30.2 kN; da:57.15 mm; ba:27.781 mm; Pa:4.45 kN; End plug (suffix Y):EPR 6; P180°:19.1 kN; P60°:50.3 kN; Mass pillow block:10.5 kg; R1:44.45 mm; Cap bolt, SAE grade:5; RG:1/8 NPT; A1:79.375 mm; Cap bolt:2 x 1/2-13 UNC; |
| 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | DN:6.5 mm; A3:3.2 mm; N:14 mm; GN:1/4-28 SAE-LT; J7:15 mm; Basic dynamic load rating C:25.5 kN; Db1:88 mm; Limiting speed:5300 r/min; Thread grub screw G2:5/16-24 UNF; N4:2 mm; L:96 mm; R1:22 mm; Housing material:Cast iron; Basic static load rating C0:15.3 kN; Rα:45 °; J:130 mm; d:34.925 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A:34.5 mm; Da:88.9 mm; |
| 560880Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Sleeve:S 124x4.1/4; B:20.904 mm; G:119.786 mm; Hydraulic nut:HMVC 24E; d:120 mm; d3 max.:155.702 mm; Mass adapter sleeve assembly:3.55 kg; B1:117.805 mm; B4:23.825 mm; Threads per inch:12; d1:107.95 mm; |
| FAG 549701 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:3440 lbf; Shaft Diameter D:1 3/8 in; Distance J:3.2500 in; Dimension S1:1.0000 in; Thread Diameter G:1/2-13; Weight W:1.60 lb; Dimension F:0.7500 in; Insert Bearing IB:Stainless Steel; Height H:3.8750 in; Width A:1.7500 in; Dimension L:4.5000 in; Basic Dynamic Radial Load Rating:4560 lbf; Dimension H1:1.8750 in; |
| 511746 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:240 kN; Calculation factor e:0.35; D:140 mm; Calculation factor Y0:0.9; Limiting speed:4800 r/min; Mass bearing:2.49 kg; d:65 mm; db min.:78 mm; a:27.732 mm; ra max.:3 mm; T:36 mm; r3,4 min.:2.5 mm; B:33 mm; D1:147 mm; d1 ≈:98.75 mm; r1,2 min.:3 mm; Fatigue load limit Pu:27.5 kN; Dimension series:2GB; C:28 mm; C1:6 mm; |
| NSK 900TFD1101 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da max.:139.5 mm; Calculation factor Y:1.1; T:54 mm; Basic dynamic load rating C:346 kN; Da min.:115 mm; Fatigue load limit Pu:45 kN; a:43.52 mm; Basic static load rating C0:400 kN; Calculation factor e:0.54; D:150 mm; r3,4 min.:2.5 mm; rb max.:2.5 mm; da max.:85 mm; d:70 mm; db min.:83 mm; r1,2 min.:3 mm; ra max.:3 mm; Dimension series:5GD; Ca min.:7 mm; Db min.:141 mm; |
| FAG 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da:160 mm; Max. speed for Taconite seal:1250 r/min; h:40.481 mm; J min.:263.525 mm; P180°:42.3 kN; H1:101.6 mm; P120°:38.3 kN; R1:60.325 mm; R2:27.94 mm; P60°:101 kN; Mass pillow block:23.6 kg; S:4.763 mm; Taconite seal:TER 38; Cap bolt:2 x 5/8-11 UNC; Cap bolt, SAE grade:8; L:349.25 mm; A2:223.838 mm; J max.:295.275 mm; ba:44.45 mm; Stabilizing ring:SR-18-15; |
| 82995 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:1 mm; Limiting speed:3400 r/min; r1,2 min.:1 mm; Mass bearing:0.85 kg; B:30 mm; Basic dynamic load rating C:121 kN; Basic static load rating C0:216 kN; D:110 mm; Reference speed:2600 r/min; Calculation factor kr:0.25; b1:5 mm; Da max.:105.3 mm; d:80 mm; K:3.5 mm; s max.:1 mm; Fatigue load limit Pu:25 kN; da min.:84.8 mm; E:100.78 mm; d1 ≈:92 mm; |
| 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A2:134.938 mm; Mass pillow block:18.1 kg; Cap bolt recommended tightening torque:298.3 N·m; End plug (suffix Y):EPR 7; h:35.719 mm; R1:46.038 mm; Stabilizing ring:SR-16-13; P90°:36 kN; PG:1/8 NPT; Da:140 mm; Pa:9.43 kN; P60°:60.5 kN; Cap bolt:2 x 5/8-11 UNC; Max. speed for PosiTrac Plus seal:2600 r/min; J max.:279.4 mm; Initial grease fill:87.885 g; H1:88.9 mm; L:330.2 mm; Cap bolt, SAE grade:8; |
| NSK 120TFD2501 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Recommended tractor speed:72 km/h; Maximum tractor speed max.:90 km/h; B1:60 mm; s:2.5 mm; Recommended tightening torque for self-locking shaft nut:300 N·m; Minimum tractor speed min.:18 km/h; Housing material:Machined steel; d:30 mm; Maximum load applied to top of disc:3 kN; Corrosion protection:Zinc-coated housing; Mass:2.2 kg; Recommended maximum temperature max.:50 °C; Minimum disc diameter min.:300 mm; |