| FAG 52474 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:2400 rpm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:182000 N; d:80.000 mm; Oil Speed Rating n2:3400 rpm; Basic Static Radial Load Rating Co:156000 N; B:68.30 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; Accessories:No Shield, no Seal,; |
| NSK 470TFD7201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Lubricant:Maintenance free &nd; Basic static load rating C0:1760 kN; d:76.2 mm; b1:8 mm; Basic dynamic load rating C:880 kN; Design (sliding contact surface combination):Steel/steel; r1 min.:2 mm; Specific static load factor K0:300 N/mm²; D:130.175 mm; M:6.5 mm; da max.:90.6 mm; α:8 °; Sealing solution:Triple-lip seals; Material constant KM:330; C:61.9 mm; Da min.:114.2 mm; dk:118.745 mm; |
| 529086 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:129000 N; Oil Speed Rating n2:4800 rpm; B:62.00 mm; Basic Dynamic Radial Load Rating C:148000 N; Grease Speed Rating n1:3600 rpm; D:130.0000 mm; d:60.000 mm; Fillet Radius ra:2.00 mm; |
| 829744 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1 max.:0.8 mm; Lw:29.8 mm; Mass needle roller:2.94 g; r1,2 min.:0.3 mm; r2 max.:1 mm; Dw:4 mm; |
| 540162 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Keyway e:89.5 mm; D:160.3000 mm; Preload:800 lb; X-L-O Part Number:165-27; Fillet Radius ra:2.00 mm; Keyway f:6.4 mm; Oil Mist Speed Rating Max. n3:2000 rpm; Grease Speed Rating Max. n1:500 rpm; B:76.20 mm; d:88.903 mm; Oil Speed Rating Max. n2:1000 rpm; |
| 523410Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:0.64 mm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:8060 N; Grease Speed Rating n1:20000 rpm; B:11.00 mm; Basic Static Radial Load Rating Co:4750 N; Oil Speed Rating n2:26000 rpm; d:15.000 mm; |
| 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | S:0.794 mm; B:65.484 mm; L:266.7 mm; Mass bearing unit:8.39 kg; A:73.025 mm; H:144.463 mm; da:61.913 mm; J min.:209.55 mm; H1:69.85 mm; Limiting speed:3800 r/min; H2:41.275 mm; Basic dynamic load rating C:193 kN; s:29.766 mm; J max.:222.25 mm; Attachment bolt diameter G:15.875 mm; |
| 518400Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil:51.710 kN; B:43 mm; Pu:346 kN; with cylindrical bore:2 400 min-1; D:170 mm; d:95 mm; Dynamic (Cr):4.5 mm; with tapered bore:3 200 min-1; rs (min):2.1 mm; Grease:464 kN; Static (Cor):8.3 mm; |
| FAG 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1 ≈:275.6 mm; Limiting value e:0.3; Axial load factor Y:0.4; db min.:242 mm; da max.:236 mm; Basic static load rating C0:830 kN; rb max.:2 mm; da min.:231 mm; s max.:2.6 mm; Reference speed:2400 r/min; Basic dynamic load rating C:457 kN; F:239 mm; Fatigue load limit Pu:83 kN; D:300 mm; Mass bearing:10.2 kg; r3,4 min.:1.5 mm; d:220 mm; r1,2 min.:2.1 mm; Limiting speed:3000 r/min; Da max.:289 mm; |
| 534038 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Stabilizing ring:SR-15-0; H2:28.575 mm; P90°:45.4 kN; J min.:219.075 mm; L:285.75 mm; End plug (suffix Y):EPR 7; ba:32.544 mm; P60°:75.6 kN; S:3.175 mm; Da:130 mm; Initial grease fill:68.04 g; H:157.559 mm; P180°:30.2 kN; RG:1/4 NPT; PG:1/8 NPT; Housing:SAF 515; da:63.5 mm; R2:21.431 mm; Cap bolt, SAE grade:5; A2:119.063 mm; |
| SKF 351475C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da min.:1535 mm; D1 ≈:1408 mm; ra max.:6 mm; Basic dynamic load rating C:1820 kN; Mass bearing (including seat washer where applicable):665 kg; Da max.:1495 mm; D:1630 mm; Basic static load rating C0:22000 kN; H:180 mm; Minimum load factor A:2900; Limiting speed:260 r/min; Fatigue load limit Pu:208 kN; d1 ≈:1622 mm; r1,2 min.:8 mm; Reference speed:180 r/min; d:1400 mm; |
| NTN CRTD7012 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:245 kN; l2 max.:281 mm; dk:80 mm; r1 min.:1 mm; G:M 52x3; Basic static load rating C0:360 kN; d2 max.:137 mm; h:210 mm; d:60 mm; l7 min.:73 mm; l1 min.:115 mm; Specific dynamic load factor K:100 N/mm²; B:44 mm; Mass rod end:5.7 kg; Material constant KM:330; C1 max.:39 mm; α:6 °; |
| NSK 240TFD3201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Calculation factor Y2:1.24; Calculation factor X:0.63; Calculation factor A:4.75; Basic dynamic load rating C:410 kN; da min.:433 mm; Fatigue load limit Pu:15.3 kN; Db max.:553 mm; Mass bearing:42 kg; D:560 mm; rb max.:1.5 mm; Limiting speed:1200 r/min; Basic static load rating C0:765 kN; Reference speed:1200 r/min; d1 ≈:467.2 mm; Da max.:547 mm; d2 ≈:449.84 mm; Calculation factor Y0:0.66; |
| FAG 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | RG:3/4 NPT; Housing:SAFS 034 KA; ba:64.294 mm; da:149.225 mm; Cap bolt recommended tightening torque:813.5 N·m; R2:38.1 mm; P150°:105 kN; H1:152.4 mm; J max.:434.975 mm; Eye bolt:2 x 3/8-16 UNC; Max. speed for Taconite seal:520 r/min; H2:60.325 mm; P120°:116 kN; Mass pillow block:87.5 kg; N1:28.575 mm; Da:259.999 mm; h:44.45 mm; R1:87.313 mm; A2:260.35 mm; Appropriate attachment bolt size G:1 in; |