| NTN CRTD6104 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass bearing + sleeve:1050 kg; db min.:880 mm; B1:380 mm; Da min.:1077 mm; Ca min.:7.7 mm; s1 max.:24 mm; B2:90 mm; d3:980 mm; Fatigue load limit Pu:1430 kN; Basic static load rating C0:24500 kN; Da max.:1192 mm; B:272 mm; Limiting speed:450 r/min; d2 ≈:964 mm; D1 ≈:1113 mm; d1:800 mm; Reference speed:320 r/min; da max.:963 mm; ra max.:6 mm; B5:115 mm; |
| 516225Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1:65 mm; B:55 mm; D:55 mm; B1:5 mm; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; Mass bushing:0.3 kg; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; d:45 mm; Coefficient of friction µ max.:0.1; |
| 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | L:511.175 mm; RG:3/4 NPT; A2:260.35 mm; H1:152.4 mm; Taconite seal:TER 141; Stabilizing ring:2 x SR-0-24; Eye bolt:2 x 3/8-16 UNC; da:152.4 mm; ba:64.294 mm; h:44.45 mm; Housing:SSAFS 034 KA; P120°:116 kN; Max. speed for Taconite seal:520 r/min; P60°:301 kN; R2:38.1 mm; R1:87.313 mm; Ca:86.614 mm; P150°:105 kN; End plug (suffix Y):EPR 18; P90°:180 kN; |
| NSK 260TFD3601 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Sleeve:S 30x5.3/8; B4:28.575 mm; Mass adapter sleeve assembly:7.25 kg; d3 max.:195.402 mm; B:24.867 mm; Threads per inch:12; d:150 mm; Hydraulic nut:HMVC 30E; G:149.555 mm; B1:107.467 mm; d1:136.525 mm; |
| FAG 5634 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | F:100 mm; Mass inner ring:0.29 kg; r, r1,2 min.:1 mm; d:90 mm; B:26 mm; |
| FAG 509391 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating Open/Shielded n1:1900 rpm; D:310.0000 mm; Accessories:Seal & Snap-Ring; Oil Speed Rating Open/Shielded n2:2400 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:216000 N; Basic Static Radial Load Rating Co:245000 N; B:51.00 mm; Sealed Speed Rating n3:1300 rpm; d:200.000 mm; |
| NTN CRTD4013 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Housing material:Sheet steel; Sealing system:5-lip seal opposite; Flange design:Flange with attachme; N:6.7 mm; D:91 mm; Maximum disc diameter max.:500 mm; B:31.5 mm; Minimum disc diameter min.:250 mm; Basic dynamic load rating C:20.8 kN; Maximum rotational disc speed max.:350 r/min; Corrosion protection:Zinc-coated housing; J:75 mm; d:16.07 mm; Recommended maximum temperature max.:50 °C; D1:55 mm; |
| FAG 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; d:95.000 mm; Basic Dynamic Radial Load Rating C:124000 N; B:32.00 mm; Basic Static Radial Load Rating Co:110000 N; D:170.0000 mm; Fillet Radius ra:2.00 mm; |
| NSK 550TFD7602 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:19 mm; d3:120 mm; d:90 mm; Hydraulic nut:HMV 18 E; Mass adapter sleeve assembly:1.45 kg; G:M 90x2; B1:65 mm; d1:80 mm; |
| 560880Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Sleeve:S 124x4.1/4; B:20.904 mm; G:119.786 mm; Hydraulic nut:HMVC 24E; d:120 mm; d3 max.:155.702 mm; Mass adapter sleeve assembly:3.55 kg; B1:117.805 mm; B4:23.825 mm; Threads per inch:12; d1:107.95 mm; |
| FAG 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r, r1,2 min.:0.3 mm; B:20 mm; F:16 mm; d:12 mm; Mass inner ring:0.013 kg; |
| SKF 351475C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da min.:1535 mm; D1 ≈:1408 mm; ra max.:6 mm; Basic dynamic load rating C:1820 kN; Mass bearing (including seat washer where applicable):665 kg; Da max.:1495 mm; D:1630 mm; Basic static load rating C0:22000 kN; H:180 mm; Minimum load factor A:2900; Limiting speed:260 r/min; Fatigue load limit Pu:208 kN; d1 ≈:1622 mm; r1,2 min.:8 mm; Reference speed:180 r/min; d:1400 mm; |
| NSK 120TFD2501 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Recommended tractor speed:72 km/h; Maximum tractor speed max.:90 km/h; B1:60 mm; s:2.5 mm; Recommended tightening torque for self-locking shaft nut:300 N·m; Minimum tractor speed min.:18 km/h; Housing material:Machined steel; d:30 mm; Maximum load applied to top of disc:3 kN; Corrosion protection:Zinc-coated housing; Mass:2.2 kg; Recommended maximum temperature max.:50 °C; Minimum disc diameter min.:300 mm; |
| 829744 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1 max.:0.8 mm; Lw:29.8 mm; Mass needle roller:2.94 g; r1,2 min.:0.3 mm; r2 max.:1 mm; Dw:4 mm; |