| No. | Brand | S | N | h | T | b | D | U | A |
| FAG 509392 | - | - | - | - | - | - | - | - | - |
| FAG 548285 | - | - | - | - | - | - | 37.0000 mm | - | - |
| SKF 350982C | - | - | - | - | - | - | 670 mm | - | - |
| FAG 524902 | - | - | - | 44.45 mm | - | - | - | - | - |
| FAG 530852 | - | - | - | - | - | 22.3 mm | 580 mm | - | - |
| NSK 240TFD3201 | - | - | - | - | - | - | 560 mm | - | - |
| FAG 544025 | - | - | - | 145 mm | - | - | - | - | - |
| NSK 420TFD6201 | - | - | - | - | - | - | 52.0000 mm | - | - |
| NSK 670TFD9001 | - | - | - | - | - | - | 120.0000 mm | - | - |
| NSK 120TFD2501 | - | - | - | - | - | - | 117 mm | - | - |
| 829784K | - | - | - | - | - | - | 800 mm | - | - |
| 522340Y | - | - | - | - | - | - | 160.0000 mm | - | - |
| NSK 260TFD3602 | - | - | - | - | - | 22.3 mm | 620 mm | - | - |
| NSK 550TFD7602 | - | - | - | - | - | - | - | - | - |
| 2THR524012 | - | - | - | - | - | - | 320.0000 mm | - | - |
| 829976 | - | 0.794 mm | - | - | - | - | - | - | 66.675 mm |
| NSK 320TFD4401 | - | - | - | - | - | - | 24.0000 mm | - | - |
| NTN CRTD8403 | - | - | - | - | - | - | 72 mm | - | - |
| FAG 52474 | - | - | - | - | - | - | 170.0000 mm | - | - |
| 547720Y | - | - | - | - | - | - | 125 mm | - | - |
| NSK 180TFD4001 | - | - | - | - | - | - | 210 mm | - | - |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:7.81 kN; Basic static load rating C0:10.8 kN; Reference speed:22000 r/min; U:10 mm; Mass needle roller and cage assembly:0.0055 kg; Ew:21 mm; Fw:17 mm; Limiting speed:26000 r/min; Fatigue load limit Pu:1.22 kN; |
| NSK 190TFD3301 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A:38.9 mm; A5:31.5 mm; Db2:100.1 mm; N:14.3 mm; Thread grub screw G2:5/16-24 UNF; Basic static load rating C0:19 kN; Mass bearing unit:2.35 kg; A1:14.3 mm; Limiting speed:2800 r/min; Hexagonal key size for grub screw N:3.969 mm; Recommended diameter for attachment bolts, mm G:12 mm; Recommended tightening torque for grub screw:6.5 N·m; T:53.2 mm; Basic dynamic load rating C:26 kN; Fatigue load limit Pu:0.8 kN; |
| NTN CRTD7012 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:245 kN; l2 max.:281 mm; dk:80 mm; r1 min.:1 mm; G:M 52x3; Basic static load rating C0:360 kN; d2 max.:137 mm; h:210 mm; d:60 mm; l7 min.:73 mm; l1 min.:115 mm; Specific dynamic load factor K:100 N/mm²; B:44 mm; Mass rod end:5.7 kg; Material constant KM:330; C1 max.:39 mm; α:6 °; |
| NSK 180TFD4001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da max.:202.5 mm; B:90 mm; Da min.:180 mm; ra max.:1 mm; D:210 mm; rb max.:1 mm; r2 min.:1 mm; α:7 °; da min.:149 mm; dk:180 mm; r1 min.:1 mm; M:6 mm; Sealing solution:Triple-lip seals; Specific dynamic load factor K:150 N/mm²; d:140 mm; Basic dynamic load rating C:1600 kN; C:70 mm; b1:13.5 mm; Design (sliding contact surface combination):Steel/steel; Mass plain bearing:11 kg; |
| 513401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Pu:77.900 kN; with cylindrical bore:3 200 min-1; D:215 mm; Static (Cor):197.760 kN; rs Dynamic (Cr):3 mm; with tapered bore:2320 ; Grease:2.780 kN; B1:mm; Oil:2 700 min-1; B:73 mm; d:100 mm; |
| 829970K DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | PG:1/4 NPT; P180°:145 kN; End plug (suffix Y):EPR 18; J min.:571.5 mm; P90°:218 kN; h:69.85 mm; J max.:635 mm; P60°:364 kN; ba:91.281 mm; L:749.3 mm; Initial grease fill:2154.6 g; RG:1 NPT; Cap bolt, SAE grade:5; J1:127 mm; Pa:60.9 kN; S:4.763 mm; Taconite seal:TER 140; Stabilizing ring:SR-40-34; P120°:136 kN; da:150.813 mm; |
| FAG 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1 ≈:275.6 mm; Limiting value e:0.3; Axial load factor Y:0.4; db min.:242 mm; da max.:236 mm; Basic static load rating C0:830 kN; rb max.:2 mm; da min.:231 mm; s max.:2.6 mm; Reference speed:2400 r/min; Basic dynamic load rating C:457 kN; F:239 mm; Fatigue load limit Pu:83 kN; D:300 mm; Mass bearing:10.2 kg; r3,4 min.:1.5 mm; d:220 mm; r1,2 min.:2.1 mm; Limiting speed:3000 r/min; Da max.:289 mm; |
| NTN CRTD4013 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Housing material:Sheet steel; Sealing system:5-lip seal opposite; Flange design:Flange with attachme; N:6.7 mm; D:91 mm; Maximum disc diameter max.:500 mm; B:31.5 mm; Minimum disc diameter min.:250 mm; Basic dynamic load rating C:20.8 kN; Maximum rotational disc speed max.:350 r/min; Corrosion protection:Zinc-coated housing; J:75 mm; d:16.07 mm; Recommended maximum temperature max.:50 °C; D1:55 mm; |
| NSK 530TFD7101 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Speed Rating Open/Shielded n2:5300 rpm; D:140.0000 mm; Sealed Speed Rating n3:2700 rpm; Grease Speed Rating Open/Shielded n1:4500 rpm; d:100.000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:41500 N; Basic Dynamic Radial Load Rating C:42300 N; B:20.00 mm; Accessories:One Shield; |
| FAG 528294 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:72 mm; b1:mm; d2 (max):mm; B:23 mm; Pu:7.840 kN; r1s (min):0.6 mm; s:1.6 mm; E:mm; b:mm; Static (Coa):64.3 kN; F:44 mm; Dynamic (Ca):64.3 kN; d2:35 mm; rs (min):1.1 mm; |
| NSK 420TFD6201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Accessories:One Seal; B:7.00 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:0.30 mm; D:52.0000 mm; d:40.000 mm; Basic Static Radial Load Rating Co:4150 N; Sealed Speed Rating n3:7500 rpm; Basic Dynamic Radial Load Rating C:4940 N; |
| FAG 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Dynamic Radial Load Rating C:133000 N; B:36.00 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; D:190.0000 mm; d:105.000 mm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:104000 N; Accessories:Two Seals; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:2200 rpm; Fillet Radius ra:2.00 mm; |
| 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:38.1 mm; N:12.3 mm; Recommended diameter for attachment bolts, mm G:10 mm; Fatigue load limit Pu:0.475 kN; A1:15 mm; Recommended tightening torque for grub screw:4 N·m; T:42.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A5:30.5 mm; Basic static load rating C0:11.2 kN; L:83 mm; Hexagonal key size for grub screw N:3.175 mm; Mass bearing unit:0.44 kg; d:31.75 mm; B4:5 mm; |
| SKF 353102 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | s1:32.6 mm; Hexagonal key size for grub screw N:4.763 mm; Db2:118 mm; Housing material:Cast iron; Recommended diameter for attachment bolts, mm G:16 mm; A1:15 mm; A3:3.2 mm; B:51.6 mm; Da:125.4 mm; DN:6.5 mm; Db1:107 mm; Basic static load rating C0:23.2 kN; Fatigue load limit Pu:0.98 kN; GN:1/4-28 SAE-LT; Basic dynamic load rating C:35.1 kN; J:111 mm; A5:33 mm; R1:28.5 mm; N4:4 mm; N:18 mm; |
SKF 351182C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS Video
351182C SKF • ABF Store
351182C SKF available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 languages
Tapered roller thrust bearings-SKF 351182 C Bearing
SKF 351182 C Tapered roller thrust bearings. Rolling mill bearings are my company leading products,widely used in steel rolling, metallurgy,petrpleum
SKF 351182C 240x320x96mm Bearing |
Jan 30, 2017 - Bearing 351182C, large stock for various brands. We specialize in exporting 351182C to all over the world. Data sheet and certificates can be
SKF 351182 C bearing - Thrust Roller Bearings - Products
SKF 351182 C Bearing Details： Bearing Name 351182 C New Model 351182C Old Model bearing product Model 351182C Category Thrust Roller Bearings
SKF 351182 C Thrust Roller Bearings - Ball Bearings
SKF 351182 C Bearing Details： Bearing Name 351182 C New Model 351182C Old Model bearing product Model 351182C Category Thrust Roller Bearings
SKF 351182C Bearing | Model：351182C
❀❀Wholesale SKF Bearing NJ2306ECP Best Discount For National ❀❀. ❀❀❀SKF Bearing NJ2306ECP Best Discount For National Day!! City: Liaocheng; State:
SKF 351182C bearing_SKF bearing_NSK bearing_FAG
Bearing name, SKF 351182C bearing. Classification, Thrust Roller Bearings Bearing, Brand, SKF. New models, 351182C, Old Models. Inner diameter d, 240