| FAG 529086 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | H:360.363 mm; Labyrinth ring:2 x LOR 123; Stabilizing ring:SR-0-28; da:127 mm; P60°:234 kN; Cap bolt:4 x 3/4-10 UNC; Appropriate attachment bolt size G:1 in; RG:3/4 NPT; H1:179.375 mm; A2:242.887 mm; Housing:SAF 628; Max. speed for PosiTrac Plus seal:1150 r/min; P180°:92.5 kN; ba:78.581 mm; End plug (suffix Y):EPR 27; A1:171.45 mm; h:65.088 mm; L:628.65 mm; PosiTrac Plus contact element:2 x B10724-122; |
| FAG 515805 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | H:473.075 mm; Ca:117.805 mm; Stabilizing ring:SR-44-38; Cap bolt recommended tightening torque:4284.4 N·m; P60°:691 kN; RG:1 NPT; P180°:285 kN; Bearing limiting speed:2000 r/min; P150°:236 kN; Pa:185 kN; db:242.887 mm; Da:399.999 mm; R2:46.831 mm; Housing:SSAFS 244; Mass pillow block:352 kg; h:79.375 mm; Initial grease fill:2749.95 g; P90°:414 kN; Labyrinth ring (dc shaft position):LOR 170; |
| 516225Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1:65 mm; B:55 mm; D:55 mm; B1:5 mm; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; Mass bushing:0.3 kg; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; d:45 mm; Coefficient of friction µ max.:0.1; |
| 560910Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A:400 mm; Taconite seal:2 x TK 76; ba max.:197 mm; N:50 mm; P90°:3600 kN; Q150°:2400 kN; P180°:3000 kN; Cap bolt, rec. tightening torque:600 N·m; H2:120 mm; N4 max.:25 mm; J6:880 mm; Q120°:4200 kN; P55°:7500 kN; Ca:210 mm; Labyrinth seal:2 x TS 76; Initial grease fill, 20%:6.2 kg; bb:167 mm; J1:220 mm; Bearing (basic designation):23168; ATK:528 mm; |
| NTN CRTD8801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | N1:14.287 mm; S:0.794 mm; a:2.381 mm; B:73.025 mm; A6:19.05 mm; d2:73.819 mm; da:50.8 mm; A:57.15 mm; Mass bearing unit:4.99 kg; A1:75.406 mm; Limiting speed:4100 r/min; L:139.7 mm; J:111.125 mm; Attachment bolt diameter G:12.7 mm; s:25.4 mm; A5:27.781 mm; Basic dynamic load rating C:84.5 kN; |
| NTN CRTD5317 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:560.0000 mm; Basic Static Radial Load Rating Co:585000 N; d:420.000 mm; Basic Dynamic Radial Load Rating C:351000 N; Grease Speed Rating Open/Shielded n1:900 rpm; Fillet Radius ra:4.00 mm; B:65.00 mm; Oil Speed Rating Open/Shielded n2:1100 rpm; Sealed Speed Rating n3:550 rpm; Accessories:One Shield; |
| NSK 250TFD3801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed for lubrication with:0 min-1; B1:76 mm; D1:mm; Oil:106.560 kN; Grease:1020 kN; Weight:0 min-1; d:120 mm; D:215 mm; Static (Cor):98 mm; Pu:678 kN; B2 B Dynamic (Cr):mm; |
| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:7 mm; d:25 mm; B1:35 mm; d1:19.05 mm; d3:38 mm; Mass adapter sleeve assembly:0.09 kg; B4:8 mm; G:M 25x1.5; |
| SKF 351475C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da min.:1535 mm; D1 ≈:1408 mm; ra max.:6 mm; Basic dynamic load rating C:1820 kN; Mass bearing (including seat washer where applicable):665 kg; Da max.:1495 mm; D:1630 mm; Basic static load rating C0:22000 kN; H:180 mm; Minimum load factor A:2900; Limiting speed:260 r/min; Fatigue load limit Pu:208 kN; d1 ≈:1622 mm; r1,2 min.:8 mm; Reference speed:180 r/min; d:1400 mm; |
| SKF 351164C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6300 rpm; d:50.000 mm; Basic Dynamic Radial Load Rating C:53900 N; D:90.0000 mm; B:30.20 mm; Grease Speed Rating n1:4800 rpm; Basic Static Radial Load Rating Co:58500 N; Sealed Speed Rating n3:4800 rpm; Accessories:Two Shields & Snap-R; |
| 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | L:511.175 mm; RG:3/4 NPT; A2:260.35 mm; H1:152.4 mm; Taconite seal:TER 141; Stabilizing ring:2 x SR-0-24; Eye bolt:2 x 3/8-16 UNC; da:152.4 mm; ba:64.294 mm; h:44.45 mm; Housing:SSAFS 034 KA; P120°:116 kN; Max. speed for Taconite seal:520 r/min; P60°:301 kN; R2:38.1 mm; R1:87.313 mm; Ca:86.614 mm; P150°:105 kN; End plug (suffix Y):EPR 18; P90°:180 kN; |
| 549701 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | s max.:19.7 mm; Mass bearing:1330 kg; ra max.:6 mm; Basic static load rating C0:24000 kN; da min.:664 mm; Basic dynamic load rating C:11000 kN; Reference speed:450 r/min; F:734 mm; Design variant/feature:NNU K30/W33; b:22.3 mm; Da max.:996 mm; Calculation factor kr:0.34; B:400 mm; d:630 mm; da max.:716 mm; K:12 mm; r1,2 min.:7.5 mm; D:1030 mm; Limiting speed:600 r/min; Fatigue load limit Pu:1630 kN; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1s (min):0.6 mm; rs (min):1 mm; B:21 mm; F:39 mm; Pu:6.110 kN; Dynamic (Ca):51.1 kN; d2:32 mm; D:65 mm; b:mm; b1:mm; d2 (max):mm; Static (Coa):50.1 kN; s:1.6 mm; E:mm; |
| NTN CRTD4013 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Housing material:Sheet steel; Sealing system:5-lip seal opposite; Flange design:Flange with attachme; N:6.7 mm; D:91 mm; Maximum disc diameter max.:500 mm; B:31.5 mm; Minimum disc diameter min.:250 mm; Basic dynamic load rating C:20.8 kN; Maximum rotational disc speed max.:350 r/min; Corrosion protection:Zinc-coated housing; J:75 mm; d:16.07 mm; Recommended maximum temperature max.:50 °C; D1:55 mm; |