| No. | Brand | M | l | L | G | J | b | F | t |
| (TEC-110) | - | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 25v17a-1c22r | - | - | - | - | - | - | - | - | - |
| EX35-2 | INA | - | - | - | - | 139.7 mm | - | - | - |
| A4 | SKF | - | - | - | M 75x2 | - | - | - | - |
| 3.6mm | - | - | - | - | M 50x1.5 | - | 6 mm | - | - |
| R8ZZ | - | - | - | - | - | - | - | - | - |
| 71922CDT/P4A | - | - | - | - | - | - | - | - | - |
| 4908 | SKF | - | - | - | - | - | - | - | - |
| 250x64 | - | - | - | - | - | - | - | - | - |
| 627 | NSK | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Im350 | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 6X4FT, | - | - | - | - | - | - | - | - | - |
| RWC35YYR | Timken | - | - | - | - | - | - | - | - |
| 1-10pcs | - | - | - | - | - | - | - | - | - |
| 63311LL | NTN | - | - | - | - | - | - | - | - |
| 6207nr | - | - | - | - | - | - | - | - | - |
| SD13 | - | - | - | - | - | - | - | - | - |
| 15250, | Timken | - | - | - | - | - | - | - | - |
| 10x | - | - | - | - | M 14x1.5 | - | - | - | - |
| 1996-2000 | - | - | - | - | - | - | - | - | - |
| mdd112c-n-020-n2l-130pbo | Rexroth | - | - | - | Tr 320x5 | - | 22.3 mm | - | - |
| 6309NR | - | - | - | 387.35 mm | - | - | - | - | - |
| DZ10 | Rexroth | - | - | - | - | - | - | - | - |
| FCDP5678275 Rolling Mill Bearing | with tapered bore:1213 ; Oil:5 300 min-1; Static (Cor):31.930 kN; rs Dynamic (Cr):1.5 mm; B1:mm; B:23 mm; Grease:0.560 kN; Pu:12.300 kN; d:65 mm; D:120 mm; |
| SL183064-TB Cylindrical Roller Bearing 320x480x121mm | Dimension S:14.3 mm; Max Fillet Rad. MFR:0.6 mm; Dimension D3:33.74 mm; Weight W:0.18 kg; Inner Width B:34.1 mm; Outside Diameter D2:52 mm; Basic Dynamic Radial Load Rating:11200 N; Outher Width C:15 mm; Basic Static Radial Load Rating Co:7800 N; Set Screw Size SSS:M6*0.75*5; |
| FC2028104 Cylindrical Roller Bearing | d:30.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:88400 N; Basic Static Radial Load Rating Co:68000 N; Oil Speed Rating n2:8000 rpm; B:46.00 mm; Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:6200 rpm; |
| NJ408, NJ408E, NJ408M, NJ408M1 Cylindrical Roller Bearing | Design (sliding contact surface combination):Steel/steel; d1 ≈:54.991 mm; Basic dynamic load rating C:170 kN; Basic static load rating C0:510 kN; D:71.438 mm; M:4 mm; r2 min.:1 mm; da max.:55 mm; Da min.:61.3 mm; Specific dynamic load factor K:100 N/mm²; |
| NJ2314 Bearing | h:2 mm; Axial static load carrying capacity:50 kN; Associated spanner:HN 7; Mass lock nut:0.091 kg; G:M 35x1.5; d3:52 mm; d1:41.5 mm; B:11.5 mm; B3:3 mm; b:5 mm; |
| 81216M Thrust Cylindrical Roller Bearing | D:240.0000 mm; Grease Speed Rating n1:2600 rpm; Basic Static Radial Load Rating Co:180000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Dynamic Radial Load Rating C:203000 N; Sealed Speed Rating n3:1800 rpm; d:110.000 mm; B:50.00 mm; Fillet Radius ra:2.50 mm; |
| 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter NU311,NU311E, NU311M, NU311ETVP2, NU311ECP Cylindrical Roller Bearing | Material constant KM:330; b1:8 mm; Specific static load factor K0:300 N/mm²; r2 min.:1 mm; Basic static load rating C0:1040 kN; M:6.5 mm; Sealing solution:Triple-lip seals; d:63.5 mm; ra max.:1 mm; rb max.:1 mm; Size (mm):0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter ; |
| Cylindrical Roller Bearing NJ2203E NU2203E NUP2203E | Basic Static Radial Load Rating Co:2280 N; Fillet Radius rb:0.10 mm; D:26.0000 mm; Basic Dynamic Radial Load Rating C:4940 N; d:10.000 mm; Grease Speed Rating n1:30000 rpm; B:8.00 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating n2:36000 rpm; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Four Row Cylindrical Roller Bearings 314049A Video