| No. | Brand | M | l | L | G | J | b | F | t |
| 21332 | - | - | - | 558.8 mm | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 6004 | - | - | - | - | - | - | - | 107 mm | - |
| 65237 | Timken | - | - | - | Tr 670x6 | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| W61806-2RS1 | - | - | - | - | - | - | - | - | - |
| 3,CAVALIER | - | - | - | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | 54.788 mm | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| A25 | - | - | - | 361.95 mm | - | - | - | - | - |
| 688 | - | - | - | 466.725 mm | - | - | - | - | - |
| A43 | Danfoss | - | - | - | - | - | - | - | - |
| SP940201 | Timken | - | - | - | - | - | - | - | - |
| Gt-010061-3940 | Rexroth | - | - | 349.25 mm | - | - | - | - | - |
| 10PCS | - | - | - | - | - | - | - | - | - |
| 104 | - | - | - | - | 44.882 mm | - | - | - | - |
| EX60-1 | - | - | - | - | - | - | - | - | - |
| 8100 | INA | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| NU315ECM/P64VA301 | - | - | - | - | - | - | - | - | - |
| 6201 | SKF | - | - | - | - | - | - | - | - |
| 3x | - | - | - | - | - | - | - | - | - |
| N207ETN1 Cylindrical Roller Bearing | rb max.:0.6 mm; Cb min.:3 mm; Reference speed:13000 r/min; Basic dynamic load rating C:29.7 kN; r3,4 min.:0.6 mm; Mass bearing:0.098 kg; Calculation factor e:0.37; Calculation factor Y0:0.9; d:20 mm; Da min.:36 mm; |
| NN 3088 K/W33 Cylindrical Roller Bearings 440x650x157 | G:Tr 220x4; Reference speed:1200 r/min; D1 ≈:351 mm; Basic static load rating C0:2900 kN; G1:30 mm; Basic dynamic load rating C:2439 kN; r1,2 min.:5 mm; Calculation factor Y0:2; d1:190 mm; K:12 mm; |
| 504547 Four Row Cylindrical Roller Bearing | d1:188 mm; Oil:1 800 min-1; Pu:15.620 kN; H:31 mm; D1:152 mm; d:150 mm; Grease:1 300 min-1; rs (min):1 mm; dynamic Cr:131.610 kN; D:190 mm; |
| Cylindrical Roller Bearing NU205 | Ew:21 mm; Limiting speed:26000 r/min; Fatigue load limit Pu:2 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 15x21x3; Reference speed:24000 r/min; U:15 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 15x21x3; Fw:15 mm; Basic dynamic load rating C:13.8 kN; Mass needle roller and cage assembly:0.011 kg; |
| 2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 1.102 Inch | 28 Millimeter NU 428 Cylindrical Roller Bearing | Cap bolt, SAE grade:8; Taconite seal:TER 189; Initial grease fill:232.47 g; Da:190 mm; S:4.763 mm; Appropriate attachment bolt size G:0.75 in; R2:28.575 mm; R1:73.025 mm; J max.:342.9 mm; Cap bolt recommended tightening torque:515.2 N·m; Size (mm):2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 1.102 Inch | 28 Millimeter ; |
| Cylindrical Roller Bearing N213E N208M N213ETN1 | D:280.0000 mm; Basic Static Radial Load Rating Co:640000 N; B:116.00 mm; d:130.000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:468000 N; Oil Speed Rating n2:2400 rpm; Fillet Radius ra:3.00 mm; |
| FC 5882240 Bearing | D:170.0000 mm; Accessories:No Shield, no Seal,; Basic Dynamic Radial Load Rating C:182000 N; Sealed Speed Rating n3:2400 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; Grease Speed Rating n1:2400 rpm; d:80.000 mm; Basic Static Radial Load Rating Co:156000 N; B:68.30 mm; |
| NNF5028 ADA-2LSV Bearing | D:110.0000 mm; Basic Dynamic Radial Load Rating C:56100 N; d:60.000 mm; Basic Static Radial Load Rating Co:51000 N; B:22.00 mm; Grease Speed Rating Open/Shielded n1:4900 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; Accessories:Two Shields & Snap-R; |
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Straight Roller Bearing NU Bearing NU311M Video