| No. | Brand | M | l | L | G | J | b | F | t |
| 344/110 | Rexroth | - | - | - | - | - | - | - | - |
| 900 | fag | - | - | - | - | - | - | - | - |
| 5-20pcs | - | - | - | - | - | - | - | - | - |
| 6001-2RS | - | - | - | - | - | - | - | - | - |
| LBCR12 | SKF | - | - | - | - | - | - | - | - |
| d1240 | - | - | - | - | - | - | - | - | - |
| AZ304711 | - | - | - | - | - | - | - | - | - |
| 86-73-3 | - | - | - | - | - | 1000 mm | - | - | - |
| 20x27x4 | - | - | - | - | 119.786 mm | - | - | - | - |
| 316L | - | - | - | - | - | - | - | 28 mm | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 2005-2006 | - | - | - | - | - | - | - | - | - |
| 125 | NTN | - | - | - | - | - | - | - | - |
| 82.55x133.35x33.338 | Timken | - | - | - | - | - | - | - | - |
| 1270FG | - | - | - | - | - | - | - | - | - |
| 1300*2800mm | - | - | - | - | - | - | - | - | - |
| 7210 | SKF | - | - | - | - | - | - | - | - |
| E345B | - | - | - | - | - | 1030 mm | - | - | - |
| PN16 | Danfoss | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| N217 Bearing 85*150*28mm | Basic Radial Load Rating-Static SCO:102000 N; Speed Rating-Open and Shielded-Grease OSG:3700 rpm; d:70.000 mm; Diameter E:94.5 mm; Basic Radial Load Rating-Dynamic DC:114000 N; Width - Inner Ring B1:63.50 mm; Accessories:300WI Filling Notch; Width - Outer Ring B0:35.0 mm; Fillet Radius ra:2.00 mm; D:150.0000 mm; |
| FC4258192A Bearing | d:30.000 mm; Oil Speed Rating n2:8500 rpm; Basic Dynamic Radial Load Rating C:46800 N; Accessories:Shield & Seal & Snap; Fillet Radius ra:1.00 mm; D:72.0000 mm; B:33.30 mm; Grease Speed Rating n1:6300 rpm; Sealed Speed Rating n3:6300 rpm; Basic Static Radial Load Rating Co:43000 N; |
| 89440 Thrust Cylindrical Roller Bearings | d:85 mm; r, r1,2 min.:1.1 mm; F:100 mm; B:35 mm; Mass inner ring:0.58 kg; |
| NU19/630 Strander Bearing | P150°:2300 kN; bb:125.5 mm; H1:340 mm; Cap bolt, rec. tightening torque:600 N·m; P120°:2600 kN; J1:220 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; s:24 mm; Q180°:2100 kN; A1:360 mm; |
| FC4464210 Bearing | Stabilizing ring:SR-30-0; Appropriate attachment bolt size G:1 in; J1:95.25 mm; Labyrinth ring:2 x LOR 126; A1:158.75 mm; h:50.8 mm; P60°:230 kN; Cap bolt:4 x 3/4-10 UNC; L:539.75 mm; Bearing limiting speed:3000 r/min; |
| SL024912 Bearing | Da max.:150 mm; ra max.:2.5 mm; rb max.:2 mm; B:55 mm; r3,4 min.:2 mm; Cb min.:13 mm; db min.:102.5 mm; Calculation factor Y0:0.8; Calculation factor e:0.43; a:40.262 mm; |
| 50 mm x 90 mm x 20 mm NJ 1012M Beaing | Calculation factor e:0.27; b:22.3 mm; Da max.:460 mm; r1,2 min.:5 mm; D:480 mm; Limiting speed:1600 r/min; D1 ≈:421 mm; B4:39 mm; da max.:312 mm; Ba min.:25 mm; Size (mm):50 mm x 90 mm x 20 mm ; |
| Cylindrical Roller Bearing N304E NJ304E NU304E NUP304E | Basic Static Radial Load Rating Co:95000 N; Basic Dynamic Radial Load Rating C:106000 N; B:44.40 mm; Oil Speed Rating n2:3800 rpm; d:80.000 mm; Sealed Speed Rating n3:2800 rpm; D:140.0000 mm; Grease Speed Rating n1:2800 rpm; Accessories:One Seal; Fillet Radius ra:2.00 mm; |
High Speed Cylindrical Roller Bearing N214 Video
Radial shaft seals with a low cross sectional height - SD
Radial shaft seals with a low cross sectional height - SD 30x37x4 .... SD 30x37x4. Dimensions. d1, 30, mm. D, 37, mm. b, 4, mm. Application and operating
SD30x37x4 INA Needle Bearing Seal 30x37x4 - Wych Bearings
SD30x37x4 INA Needle Bearing Seal 30x37x4 Type SD - Low Cross Section with Wiper. Low cross section radial shaft seals are specifically designed to fit
CR Seals (SKF) 30X37X4 - Nitrile Oil Seal - HMS4 Design
CR Seals (SKF) 30X37X4 - Nitrile Oil Seal - HMS4 Design, Single Lip with Spring, 30 mm Shaft, 37 mm OD, 4 mm Width, Nitrile, HMS4, Pack of 15
CR Seals (SKF) - 30X37X4 - Motion Industries
Buy CR Seals (SKF) Oil Seals 30X37X4 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Rotary shaft seal OAS-30X37X4-NBR - 30x37x4 mm
Rotary shaft seal OAS-30X37X4-NBR IN STOCK, dim : Ø int. 30 x Ø ext. 37 x th. 4 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years
Chicago Rawhide | 30X37X4 HM4 R | Radial Shaft Seal
Shop Chicago Rawhide 30X37X4 HM4 R at Applied.com, which includes; Radial Shaft Seal, Radial Shaft Seal, 30 mm Shaft Diameter, 37 mm Housing Bore
National Oil Seal 30X37X4 | O'Reilly Auto Parts
Shop for National Oil Seal Part #: 30X37X4 for your vehicle. Get product details, choose a store, and get directions. Place your order online today and pick it up
G30x37x4 SKF Needle Bearing Seal 30x37x4 - WychBearings
G30x37x4 SKF Needle Bearing Seal 30x37x4 Type G - Low Cross Section. Low cross section radial shaft seals are specifically designed to fit needle bearing