| 10 mm x 26 mm x 8 mm N314, N314E, N314M, N314ECP, N314ETVP2 Cylindrical Roller Bearing | r1,2 min.:7.5 mm; Misalignment factor k1:0; Operating clearance factor k2:0.11; d3:870 mm; Ca min.:7.4 mm; ra max.:6 mm; B:250 mm; Basic static load rating C0:19300 kN; Da min.:961 mm; db min.:778 mm; Size (mm):10 mm x 26 mm x 8 mm ; |
| FC202970 Cylindrical Roller Bearing 100x145x70mm | r1,2 min.:0.6 mm; Preload class B GB:140 N; Static axial stiffness, preload class D:221 N/µm; Preload class C GC:280 N; Ball diameter Dw:6.35 mm; Preload class A GA:70 N; B:12 mm; Static axial stiffness, preload class A:98 N/µm; D2:57.12 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| 538977 Four Row Cylindrical Roller Beairng | Pin Dia A1:0.2500 in; Dimension C:2.6250 in; Dimension N:0.7813 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension H:0.8750 in; Dimension B:3.1250 in; Insert Bearing IB:Stainless Steel; Weight W:0.70 lb; Dimension S1:0.7813 in; Shaft Diameter D:1 in; |
| FC3042150 Cylindrical Roller Bearing | D:130.0000 mm; d:75.000 mm; Grease Speed Rating n1:3200 rpm; B:41.30 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:137000 N; Basic Dynamic Radial Load Rating C:108000 N; Accessories:Two Shields; |
| NJ2319 ECML Bearing | A1:133.35 mm; P90°:113 kN; Max. speed for PosiTrac Plus seal:1450 r/min; L:466.725 mm; Housing:SAF 622; P180°:84.5 kN; Appropriate attachment bolt size G:0.875 in; Cap bolt recommended tightening torque:1220 N·m; Pa:16.7 kN; H:287.337 mm; |
| NU2316 Cylinder Roller Bearings | B1:mm; rs Dynamic (Cr):1.5 mm; Static (Cor):45.220 kN; D:125 mm; with cylindrical bore:6 000 min-1; d:70 mm; Grease:0.780 kN; Pu:17.100 kN; Oil:5 000 min-1; B:31 mm; |
| SL024936 Cylindrical Roller Bearings 180x250x69mm | Basic Dynamic Radial Load Rating C:71500 N; D:120.0000 mm; Oil Speed Rating Open/Shielded n2:6700 rpm; Sealed Speed Rating n3:3800 rpm; d:55.000 mm; Accessories:Without Accessories; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:2.00 mm; B:29.00 mm; Grease Speed Rating n1:5600 rpm; |
| Cylindrical Roller Bearing N330M | Calculation factor A:104; da min.:496 mm; Da max.:794 mm; Limiting speed:1100 r/min; r1,2 min.:7.5 mm; Basic static load rating C0:4250 kN; D:830 mm; ra max.:6 mm; Mass bearing:415 kg; a:645 mm; |