| No. | Brand | M | l | L | G | J | b | F | t |
| LC-760 | - | - | - | - | - | - | - | - | - |
| E385 | - | - | - | - | - | - | - | - | - |
| Bpr55 | - | - | - | - | - | - | - | - | - |
| 16-1-2 | - | - | - | - | - | - | - | - | - |
| 60MKii | - | - | - | 539.75 mm | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 6903RS | - | - | - | - | - | - | - | - | - |
| 1100*1100 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 21309EKW | SKF | - | - | - | - | - | - | - | - |
| 50x80x16 | NSK | 27.5 mm | - | - | - | - | - | - | - |
| H309 | SKF | - | - | - | - | - | - | - | - |
| (WD-06015) | - | - | - | - | - | - | - | 154 mm | - |
| 17x30x9 | - | - | - | - | M 42x3 | - | - | - | - |
| 413 | - | - | - | - | - | - | - | 25 mm | - |
| N21%, | - | - | - | - | - | - | - | - | - |
| 1971-1978 | Timken | - | - | - | - | - | - | - | - |
| (15mm/18mm) | - | - | - | - | - | - | - | - | - |
| 100%Polyester | - | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| H22WXBG2B9000CB | Parker | - | - | - | - | - | - | - | - |
| RF600 | - | - | - | - | - | - | - | - | - |
| 16100 | - | - | - | - | - | - | - | - | - |
| a2fm | Rexroth | - | - | - | - | - | - | - | - |
| 22219EX | Nachi | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| NNU4240X1 Bearing | H:287.337 mm; da:96.838 mm; A2:273.05 mm; J max.:406.4 mm; Stabilizing ring:2 x SR-1622; Initial grease fill:765.45 g; h:63.5 mm; PG:1/4 NPT; Da:240 mm; Ca:89.789 mm; |
| 81156 Thrust Cylindrical Roller Bearings | d:60 mm; Limiting speed:6000 r/min; Abutment housing - axial space at the small side face/ both sides of the outer ring Cb min.:4.5 mm; r1,2 min.:2 mm; Calculation factor Y1:1.7; Calculation factor e:0.4; Reference speed:4000 r/min; Fillet radius ra max.:2 mm; d1 ≈:80.9 mm; r5 min.:0.6 mm; |
| NU2305EM Bearing 25x62x24mm | d1:601.25 mm; ra max.:10 mm; Reference speed:260 r/min; H:136.525 mm; Limiting speed:500 r/min; Fatigue load limit Pu:1800 kN; Dynamic load rating C90:2885 kN; Basic dynamic load rating C:8300 kN; Basic static load rating C0:33500 kN; D1:279.4 mm; |
| NJG2307 SL192307 Full Complement Cylindrical Roller Bearing | Initial grease fill:141.75 g; H2:41.275 mm; P180°:49.8 kN; Adapter sleeve assembly:SNW 115x2.7/16; Bearing:22315 EK; A1:98.425 mm; Cap bolt:2 x 5/8-11 UNC; Max. speed for Taconite seal:1250 r/min; Cap bolt recommended tightening torque:298.3 N·m; Da:160 mm; |
| 568450 Four Row Cylindrical Roller Bearing On Roll Neck | H:257.175 mm; h:46.831 mm; R1:79.375 mm; ba:53.181 mm; L:419.1 mm; End plug (suffix Y):EPR 14; J min.:336.55 mm; RG:1/2 NPT; PosiTrac Plus contact element:2 x B10724-113; Labyrinth ring:2 x LOR 111; |
| NU1088 Bearing 440x650x94mm | Shaft C/L Distance F:1 2/5 in; Frame Accepts These Shaft Sizes (Bearing Bore):20 mm, 25 mm; Frame Size A:4 1/8 in; Bolt Pattern E:12 1/2 in; Bolt Pattern C:0.55 in; Length H:0.500 in; Frame Size B:14 in; Height G:2.938 in; Bolt Pattern D:2 1/4 in; Travel:9; |
| NJ2312M+HJ2312 Cylindrical Roller Bearing | Grease Speed Rating n1:5600 rpm; d:35.000 mm; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; Basic Static Radial Load Rating Co:48000 N; Accessories:Shield & Seal; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm; Basic Dynamic Radial Load Rating C:52300 N; B:38.10 mm; |
| 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter Nj207 Bearing | B2:8.5 mm; d:45 mm; Mass angle ring:0.052 kg; d1 ≈:58.95 mm; B1:5 mm; r3,4 min.:1.1 mm; Size (mm):0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter ; |
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
NU18/600 Cylindrical Roller Bearing Video