| No. | Brand | M | l | L | G | J | b | F | t |
| 100% | - | - | - | - | - | - | - | - | - |
| #R900523914 | Rexroth | - | - | - | - | - | - | - | - |
| 61805-2RZ | SKF | - | - | - | - | - | - | - | - |
| pc400-8 | INA | - | - | - | - | - | - | - | - |
| CL2B-DAL4 | - | - | - | - | - | - | - | - | - |
| 35X62X14 | - | - | - | - | - | - | - | - | - |
| 2040 | John Deere | - | - | - | M 55x2 | - | - | - | - |
| GBF25 | thk | - | - | - | - | - | - | - | - |
| 6000 | - | - | - | - | 258.877 mm | - | - | - | - |
| KB050AR0 | fag | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 16-16-8 | - | - | - | - | M 190x3 | - | - | - | - |
| 5] | - | - | - | - | - | - | - | - | - |
| 17x9 | - | - | - | - | - | - | - | - | - |
| 1308 | NSK | - | - | - | - | - | - | - | - |
| 606ZZ | - | - | - | - | - | - | - | - | - |
| VZ800 | - | - | - | - | 219.151 mm | - | - | - | - |
| P3W227U | Rexnord | - | - | - | - | 53 mm | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 204KDD4 | FAFNIR | - | - | - | - | - | - | - | - |
| 1mm | - | - | - | - | - | - | - | - | - |
| K1 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | M 180x3 | - | - | - | - |
| 6063 | - | - | - | - | - | - | - | - | - |
| N21% | INA | - | - | - | - | - | - | - | - |
| NU256MA | - | - | - | - | - | - | - | - | - |
| 9123358 | INA | - | - | - | - | - | - | 20 mm | - |
| KP8-FS428, | RBC | - | - | - | - | - | - | 28 mm | - |
| 469/453X | Timken | - | - | - | - | - | - | - | - |
| NNU4964 Bearing | Oil Speed Rating n2:5300 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:112000 N; Grease Speed Rating n1:4000 rpm; Basic Static Radial Load Rating Co:78000 N; B:54.00 mm; Fillet Radius ra:2.00 mm; d:45.000 mm; |
| SL04 5020-PP Cylindrical Roler Bearing | ra max.:0.6 mm; Calculation factor f0:13.1; Basic dynamic load rating C:5.4 kN; Mass bearing:0.032 kg; Limiting speed:40000 r/min; D:30 mm; da min.:14.2 mm; Basic static load rating C0:2.36 kN; B:9 mm; d:10 mm; |
| Cylindrical Roller Bearing N 211 ECP, N 211 ECM, N 211 ECJ | Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:108000 N; D:140.0000 mm; Basic Static Radial Load Rating Co:78000 N; Oil Speed Rating n2:5800 rpm; B:33.00 mm; d:55.000 mm; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:2.00 mm; |
| NNU3948 Bearing | B:19 mm; Grease:10 600 min-1; da:21 min; d:15 mm; a:27 mm; Dynamic (Cr):17.369 kN; D:42 mm; Pu:0.541 kN; rs (min):1 mm; Static (Cor):11.900 kN; |
| NU1048 Cylindrical Roller Bearing | Basic Static Radial Load Rating Co:53000 N; Oil Speed Rating n2:5300 rpm; Grease Speed Rating Open/Shielded n1:4500 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:72800 N; Oil Speed Rating Open/Shielded n2:5300 rpm; B:26.00 mm; Grease Speed Rating n1:4500 rpm; D:140.0000 mm; Accessories:Two Seals & Snap-Rin; |
| NU222 110*200*38mm | H:209.55 mm; Bearing limiting speed:5300 r/min; Labyrinth ring (dc shaft position):LOR 60; P180°:34.7 kN; Pa:21.4 kN; End plug (suffix Y):EPR 10; Housing:SAF 316; H1:107.95 mm; J min.:269.875 mm; Lock washer:W 16; |
| FC3448156 Bearing 170*240*156 | Specific static load factor K0:500 N/mm²; B:29 mm; d1 ≈:29 mm; Da min.:36.9 mm; rb max.:0.6 mm; α:4 °; D:42 mm; ra max.:0.3 mm; b1:3.1 mm; b:3.1 mm; |
| NF207E Roller Bearing | Basic Radial Load Rating-Static SCO:8000 N; Width - Inner Ring B1:15.20 mm; Width - Overall B:15.9 mm; D:52.0000 mm; Basic Interchange BCA:8026; Old MRC Bearing Number:205FS3; Accessories:8000 One Seal; d:26.000 mm; Fillet Radius ra:1.00 mm; Basic Interchange NDH:8026; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
531597 Four Row Cylindrical Roller Bearing Video