| No. | Brand | M | l | L | G | J | b | F | t |
| (50ml+50ml) | - | - | - | - | - | - | - | - | - |
| LC-760 | - | - | - | - | - | - | - | - | - |
| 6061t6 | - | - | - | - | - | - | - | - | - |
| 25] | - | - | - | - | - | - | - | - | - |
| KF055XP0 | Kaydon | - | - | - | - | - | - | - | - |
| 25kg | - | - | - | - | - | - | - | - | - |
| MOS-35x55x10TC, | - | - | - | - | - | - | - | - | - |
| SD16 | - | - | - | - | - | - | - | - | - |
| G23826151 | - | - | - | - | - | - | - | - | - |
| Cabinet-C004 | - | - | - | - | - | - | 22.3 mm | - | - |
| La208-Indoor/Outdoor | - | - | - | 126 mm | - | - | - | - | - |
| YC85 | - | - | - | - | - | - | - | - | - |
| 14138A/14274 | INA | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 1x | fag | - | - | - | - | - | - | - | - |
| EX150 | - | - | - | - | M 20x1 | - | 5 mm | - | - |
| ip65 | - | - | - | - | - | - | - | - | - |
| Seal,9mm | NTN | - | - | - | - | - | - | - | - |
| CH11555 | John Deere | - | - | - | - | - | - | - | - |
| 80% | - | - | - | - | - | - | - | - | - |
| (O4C-1, | - | - | - | - | - | - | - | 26 mm | - |
| AT21140 | John Deere | - | - | - | - | - | - | - | - |
| 23992CAK/C3W33 | - | - | - | - | - | - | - | - | - |
| 6034 | NSK | - | - | - | - | 116.5 mm | - | - | - |
| C3 | - | - | - | - | - | - | - | - | - |
| AV280 | - | - | - | - | - | - | - | - | - |
| A10VSO140 | Rexroth | - | - | - | - | - | - | - | - |
| OMR375cc | - | - | - | - | - | - | - | - | - |
| 48X96' | INA | - | - | - | - | - | - | - | - |
| N1021-K-PVPA-SP Bearing 105x160x26mm | Basic static load rating C0:15.3 kN; R1:22 mm; N:14 mm; d:36.513 mm; Db2:96 mm; A:34.5 mm; RG:1/4-28 UNF; Bearing:YET 207-107; Db1:88 mm; B1:38.9 mm; |
| SL 18 5017 Bearing | Static (Cor):8.535 kN; a:15 mm; Dynamic (Cr):16.388 kN; Oil:15 000 min-1; Pu:0.388 kN; B:14 mm; rs (min):1 mm; Grease:12 600 min-1; D:47 mm; d:20 mm; |
| Cylindrical Roller Bearing RNU310 RNU310M | Fillet Radius ra:0.64 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; d:17.000 mm; Grease Speed Rating n1:17000 rpm; Basic Dynamic Radial Load Rating C:9560 N; Accessories:Snap-Ring; Sealed Speed Rating n3:12000 rpm; Basic Static Radial Load Rating Co:4750 N; Oil Speed Rating Open/Shielded n2:20000 rpm; Oil Speed Rating n2:20000 rpm; |
| Cylindrical Roller N2315E.M1.C3 Bearing | Grease Speed Rating n1:5600 rpm; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; B:30.20 mm; Accessories:Two Shields & Snap-R; D:80.0000 mm; Basic Dynamic Radial Load Rating C:44900 N; Basic Static Radial Load Rating Co:34000 N; Oil Speed Rating n2:7500 rpm; d:40.000 mm; |
| 89456 Thrust Cylindrical Roller Bearings | d:65.000 mm; Oil Speed Rating Open/Shielded n2:7400 rpm; Basic Dynamic Radial Load Rating C:27000 N; Fillet Radius ra:1.00 mm; D:115.0000 mm; B:14.00 mm; Grease Speed Rating Open/Shielded n1:6100 rpm; Basic Static Radial Load Rating Co:23600 N; |
| NJ326M Bearing | Accessories:One Shield; Basic Dynamic Radial Load Rating C:48800 N; d:50.000 mm; Fillet Radius ra:1.00 mm; D:90.0000 mm; B:30.20 mm; Basic Static Radial Load Rating Co:39000 N; Oil Speed Rating n2:6300 rpm; Sealed Speed Rating n3:4800 rpm; Grease Speed Rating n1:4800 rpm; |
| SL014868 Cylindrical Roller Bearings 340x420x80mm | J max.:279.4 mm; A2:198.438 mm; Cap bolt recommended tightening torque:149.1 N·m; Mass pillow block:17.9 kg; Pa:9.25 kN; S:4.763 mm; Initial grease fill:110.56 g; ba:35.719 mm; R2:22.225 mm; Housing:FSAF 517; |
| NU2319 Cylindrical Roller Bearing 95*200*67mm | da max.:58.5 mm; B:20 mm; d2 ≈:58.884 mm; da min.:57 mm; D:90 mm; Calculation factor kr:0.025; r1,2 min.:1.1 mm; Mass bearing:0.46 kg; Basic dynamic load rating C:37.1 kN; Da max.:83 mm; |
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
N215, N215E, N215M, N215ECP, N215ETVP2 Cylindrical Roller Bearing Video