| NJ314E Cylindrical Roller Bearing 70*150*35mm | d:110.000 mm; Grease Speed Rating Open/Shielded n1:2100 rpm; Accessories:Seal & Snap-Ring; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Basic Dynamic Radial Load Rating C:270000 N; D:320.0000 mm; B:70.00 mm; Basic Static Radial Load Rating Co:260000 N; Sealed Speed Rating n3:1500 rpm; |
| NU305 Cylindrical Bearing 25x62x17mm | Mass needle roller and cage assembly:0.018 kg; Reference speed:13000 r/min; Limiting speed:14000 r/min; Basic dynamic load rating C:14.7 kN; Fatigue load limit Pu:3 kN; Basic static load rating C0:25.5 kN; Ew:37 mm; Fw:32 mm; U:13 mm; |
| NU2212M Cylindrical Roller Bearing 60x110x28mm | Stabilizing ring:2 x 38151-24; PG:1/4 NPT; Mass pillow block:28.6 kg; H2:44.45 mm; Cap bolt:2 x 3/4-10 UNC; Housing:SAF 024 KA; R2:30.163 mm; da:106.362 mm; J min.:295.275 mm; Bearing:23024 CCK/W33; |
| SL183010 Cylindrical Roller Bearing 50x80x23mm | Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Basic Dynamic Radial Load Rating C:32500 N; d:60.000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Basic Static Radial Load Rating Co:25000 N; B:18.00 mm; Accessories:Two Shields; D:95.0000 mm; Sealed Speed Rating n3:4300 rpm; |
| NU208 Cylindrical Roller Bearing | Mass rod end:0.53 kg; d2 max.:65 mm; l1 min.:53 mm; l7 min.:30 mm; Basic dynamic load rating C:48 kN; dk:35.5 mm; Basic static load rating C0:78 kN; Material constant KM:330; h:94 mm; G:M 24x2; |
| FC3652168Q1 Mill Four Row Cylindrical Roller Bearing 180x260x168mm | F:165 mm; B:40 mm; r, r1,2 min.:1.1 mm; Mass inner ring:1.12 kg; d:150 mm; |
| FC3650120 Bearing | P150°:185 kN; Labyrinth ring:2 x LOR 551; Mass pillow block:251 kg; ba:89.694 mm; Eye bolt:2 x 1/2-13 UNC; PosiTrac Plus contact element:2 x B10724-552; h:56.356 mm; P90°:334 kN; Da:359.999 mm; End plug (suffix Y):X-5217-4; |
| FC5880180 Four Row Cylindrical Roller Bearing 290*400*180 | A1:88.9 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; R2:22.225 mm; P150°:20.9 kN; H2:31.75 mm; Max. speed for Taconite seal:1050 r/min; N1:19.05 mm; PG:1/8 NPT; Taconite seal:TER 52; |