| SL04.5006PP NNF5006ADA-2LSV Bearings | End plug (suffix Y):EPR 23; Stabilizing ring:SR-44-38; PosiTrac Plus contact element:2 x B10724-167; Ca:117.805 mm; da:190.5 mm; Max. speed for PosiTrac Plus seal:725 r/min; P120°:260 kN; Cap bolt recommended tightening torque:4284.4 N·m; Eye bolt:2 x 1/2-13 UNC; P90°:414 kN; |
| SL 18 2210 Bearing | Lock nut:HM 3160; Da:540 mm; L:880 mm; db:320 mm; da:300 mm; H:631 mm; Taconite seal:2 x TK 72; N1:42 mm; Ca:196 mm; bc:186.5 mm; |
| NNQD6032X2/C4 Mill Four Row Cylindrical Roller Bearing | Grease Speed Rating n1:3200 rpm; Accessories:One Shield; Oil Speed Rating n2:4300 rpm; B:61.90 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:138000 N; Basic Static Radial Load Rating Co:108000 N; d:65.000 mm; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:2.00 mm; |
| NUP238M Bearing | D1:116.1 mm; Preload class C GC:1000 N; db min.:91 mm; Attainable speed for grease lubrication:10000 r/min; d1:98.9 mm; dn:101.9 mm; rb max.:0.6 mm; Calculation factor f1:1; Static axial stiffness, preload class D:268 N/µm; Basic static load rating C0:65.5 kN; |
| NJ 2230 Cylindrical Roller Bearing | s:5 mm; Static (Coa):1753 kN; b1:39.5 mm; D:540 mm; r1s (min):6 mm; d2 (max):423 mm; Pu:136.150 kN; E:mm; d2:360 mm; F:480 mm; |
| NJ2308 Bearing | d:45 mm; B:25.5 mm; F:50 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.075 kg; |
| SL182992 Cylindrical Roller Bearing 460x620x95mm | w:55 mm; Material constant KM:330; Mass rod end:3.2 kg; Basic dynamic load rating C:127 kN; d4 ≈:65 mm; C1 max.:28 mm; d:45 mm; h1:165 mm; B:32 mm; d2 max.:104 mm; |
| NU344 Single Row Cylindrical Roller Bearings | d:55.000 mm; B:33.00 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:4100 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:90000 N; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Dynamic Radial Load Rating C:108000 N; D:140.0000 mm; |