| No. | Brand | M | l | L | G | J | b | F | t |
| 625 | NTN | - | - | - | - | - | 3.1 mm | - | - |
| 6001UC3 | NTN | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| K3V112DT-1RBR-9T1S | - | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 99.5%min | - | - | - | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | 118 mm | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| ABEC-5 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| PC200-7 | - | - | - | - | - | - | - | - | - |
| ABEC-5 | - | - | - | - | - | - | - | - | - |
| 850 | NTN | - | - | - | - | - | - | - | - |
| 7240-10601 | INA | - | - | - | - | - | - | - | - |
| 525 | NTN | - | - | - | - | - | - | - | - |
| 20% | Nachi | - | - | - | - | - | - | 25 mm | - |
| 4 | - | - | - | - | - | - | - | - | - |
| PV90r100 | - | - | - | - | - | - | - | - | - |
| 65% | - | - | - | - | - | 135.5 mm | - | - | - |
| A4050 | koyo | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| D32 | - | - | - | - | - | - | - | - | - |
| NCF2944V Bearing | Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:19500 N; Basic Static Radial Load Rating Co:11200 N; d:30.000 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Sealed Speed Rating n3:7500 rpm; B:16.00 mm; Oil Speed Rating n2:13000 rpm; Grease Speed Rating n1:10000 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; |
| NJ 2230 Cylindrical Roller Bearing | s:5 mm; Static (Coa):1753 kN; b1:39.5 mm; D:540 mm; r1s (min):6 mm; d2 (max):423 mm; Pu:136.150 kN; E:mm; d2:360 mm; F:480 mm; |
| NJ322 E/EMC3 Cylindrical Roller Bearing | Mass pillow block:52.2 kg; H2:50.8 mm; Cap bolt recommended tightening torque:298.3 N·m; P150°:59.6 kN; Stabilizing ring:SR-22-19; N1:22.225 mm; Eye bolt:2 x 3/8-16 UNC; H:239.316 mm; P120°:66.7 kN; J max.:368.3 mm; |
| NF1021M Bearing | Mass inner ring:0.025 kg; d:28 mm; F:32 mm; r, r1,2 min.:0.3 mm; B:17 mm; |
| SL024830 Cylindrical Roller Bearings 150x190x40mm | Oil seal:2 x TSD 3156 U; N:50 mm; da:260 mm; A1:280 mm; Da:460 mm; H2:105 mm; N4 max.:20 mm; Eye bolt, size:2 x M 24; Q120°:2860 kN; H:551 mm; |
| 4.331 Inch | 110 Millimeter x 5.906 Inch | 150 Millimeter x 1.575 Inch | 40 Millimeter HCN1021-K-PVPA-SP-H193 Bearing 105x160x26mm | Lw:15.8 mm; r1 max.:0.8 mm; Dw:4 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Mass needle roller:1.56 g; Size (mm):4.331 Inch | 110 Millimeter x 5.906 Inch | 150 Millimeter x 1.575 Inch | 40 Millimeter ; |
| 81217TN Thrust Cylindrical Roller Bearings | Thread grub screw G2:M10x1; J7:15.5 mm; J min.:119 mm; A:45 mm; J6:146 mm; N4:4 mm; L:160 mm; Recommended diameter for attachment bolts, inch G:0.5 in; End cover:ECY 207; H:93 mm; |
| RN308M Cylindrical Roller Bearings 40x77.5x23mm | R2:42.862 mm; PG:1/4 NPT; Housing:SAF 048 KA; Taconite seal:TER 552; J min.:571.5 mm; Max. speed for Taconite seal:340 r/min; P120°:136 kN; Pa:66.7 kN; A1:203.2 mm; Cap bolt, SAE grade:5; |
NCF1864V Single-row Full-roller Cylindrical Bearing Video