| NU306EM Bearing 30X72x19mm | d:35 mm; D:62 mm; Basic dynamic load rating C:52.3 kN; Fatigue load limit Pu:5.85 kN; da max.:41 mm; Ca min.:4 mm; Reference speed:8500 r/min; Calculation factor Y:1.3; T:18 mm; Mass bearing:0.23 kg; |
| NU2205E Bearing 25X52X18mm | Housing:FSAFS 517; S:4.763 mm; Cap bolt recommended tightening torque:298.3 N·m; J min.:250.825 mm; J max.:279.4 mm; ba:35.719 mm; RG:3/8 NPT; Initial grease fill:110.56 g; L:330.2 mm; Bearing:22217 EK; |
| INA ZARN3080-L-TV Bearing | Basic static load rating C0:5000 kN; Mass bearing:98.2 kg; Basic dynamic load rating C:2900 kN; Ca min.:2.1 mm; Da max.:502 mm; Limiting speed:1300 r/min; D:520 mm; Operating clearance factor k2:0.099; r1,2 min.:5 mm; s1 max.:25 mm; |
| N 232 Axle Boxes Bearing | Basic dynamic load rating C:30.7 kN; Recommended diameter for attachment bolts, inch G:0.5 in; N:14 mm; d:38.1 mm; Recommended tightening torque for grub screw:16.5 N·m; J:101.5 mm; A:38.5 mm; Bearing:YELAG 208-108; RG:1/4-28 UNF; Mass bearing unit:1.95 kg; |
| NN3084KTN9/SPW33 Cylindrical Roller Bearing 420x620x150mm | A1:79.375 mm; Cap bolt recommended tightening torque:149.1 N·m; Initial grease fill:68.04 g; P120°:13.3 kN; J min.:206.375 mm; h:36.513 mm; Cap bolt:2 x 1/2-13 UNC; RG:1/4 NPT; Cap bolt, SAE grade:8; Bearing:22311 EK; |
| NUP2213, NUP2213E, NUP2213M, NUP2213ECP, NUP2213ETVP2 Cylindrical Roller Bearing | D:80.0000 mm; Basic Dynamic Radial Load Rating C:33200 N; d:35.000 mm; Oil Speed Rating n2:10000 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:19000 N; B:21.00 mm; Sealed Speed Rating n3:6000 rpm; Accessories:Two Shields & Snap-R; |
| NU2211,NU2211E, NU2211M, NU2211ECP, NU2211ETVP2 Cylindrical Roller Bearing | Basic static load rating C0:32.5 kN; r1,2 min.:3.5 mm; T:14.224 mm; Calculation factor Y0:0.9; d1 ≈:40.75 mm; Da min.:45 mm; D:50.292 mm; Da max.:44 mm; db min.:41 mm; a:10.529 mm; |
| NJ2240 Cylindrical Roller Bearing 200*360*98mm | Oil Speed Rating n2:2800 rpm; Sealed Speed Rating n3:1800 rpm; Basic Dynamic Radial Load Rating C:186000 N; d:105.000 mm; B:65.10 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:180000 N; D:190.0000 mm; Accessories:Shield & Seal & Snap; |