| NN3056/P4 Double Row Cylindrical Roller Bearing | B:52.40 mm; Accessories:One Seal & Snap-Ring; Fillet Radius ra:2.00 mm; D:160.0000 mm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Basic Static Radial Load Rating Co:120000 N; Grease Speed Rating n1:2400 rpm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:130000 N; |
| FC3652168/YA3 Mill Four Row Cylindrical Roller Bearing 180x260x168mm | Fillet Radius ra:2.00 mm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:101000 N; d:60.000 mm; Fillet Radius rb:1.00 mm; B:31.00 mm; Basic Static Radial Load Rating Co:71000 N; Oil Speed Rating n2:17000 rpm; Grease Speed Rating n1:12000 rpm; |
| 50,8 mm x 93,264 mm x 30,302 mm NJ203ECJ Cylindrical Roller Bearing | S:4.763 mm; R2:42.862 mm; Initial grease fill:2154.6 g; Housing:SAF 634; L:749.3 mm; H1:209.55 mm; P90°:218 kN; P150°:120 kN; N1:34.925 mm; J max.:635 mm; Size (mm):50,8 mm x 93,264 mm x 30,302 mm ; |
| N 2328 Cylindrical Roller Bearing | K:12 mm; Calculation factor e:0.3; da min.:420 mm; Basic dynamic load rating C:7832 kN; b:22.3 mm; Da max.:788 mm; Limiting speed:750 r/min; r1,2 min.:7.5 mm; Calculation factor Y2:3.4; d1:380 mm; |
| NU1038ML BEARING 190x290x46mm | RG:1/4-28 UNF; Rα:45 °; L:96 mm; Bearing:YAR 207-106-2F; Thread grub screw G2:5/16-24 UNF; End cover:ECY 207; A3:3.2 mm; H:156 mm; SWN:7 mm; Recommended tightening torque for grub screw:6.5 N·m; |
| N2305E Cylindical Roller Bearing 25*62*24mm | B:20 mm; F:14 mm; d:10 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.011 kg; |
| SL 18 4920 Bearing | Basic static load rating C0:3050 kN; B:102 mm; Cb min.:29 mm; a:93 mm; Basic dynamic load rating C:2120 kN; Calculation factor e:0.35; D:540 mm; Limiting speed:1300 r/min; Calculation factor Y:1.7; Mass bearing:107 kg; |
| SL 18 2211 Bearing | Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:22500 N; Grease Speed Rating n1:8500 rpm; Basic Static Radial Load Rating Co:14600 N; Accessories:Two Seals & Snap-Rin; d:20.000 mm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Sealed Speed Rating n3:8500 rpm; B:25.40 mm; |