| NF209 Cylindrical Roller Bearing 45*85*19mm | Basic Static Radial Load Rating Co:166000 N; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:156000 N; D:150.0000 mm; B:56.00 mm; Fillet Radius ra:2.00 mm; d:85.000 mm; Fillet Radius rb:1.00 mm; |
| NU1011 Bearing 55x90x18mm | Limiting speed:11000 r/min; U:20 mm; Ew:48 mm; Basic dynamic load rating C:34.7 kN; Fatigue load limit Pu:7.35 kN; Fw:40 mm; Reference speed:10000 r/min; Basic static load rating C0:58.5 kN; Mass needle roller and cage assembly:0.049 kg; |
| 506869 Four Row Cylindrical Roller Bearing | ba:31.75 mm; P180°:25.4 kN; Ca:45.796 mm; J min.:250.825 mm; Housing:FSAF 517; da:73.025 mm; J max.:279.4 mm; P120°:23.1 kN; Cap bolt, SAE grade:5; N1:19.05 mm; |
| NU1021E.M1 Cylindrical Roller Bearing | Bearing (basic designation):23044; N4 max.:20 mm; Appropriate attachment bolt, rec. tightening torque:1310 N·m; P0°:2600 kN; Q120°:1800 kN; Lock nut:HM 3044; ATS:290 mm; A1:230 mm; H1:210 mm; Taconite seal:2 x TK 52; |
| ZARF1762-TV Thrust Roller Bearings 17x62x43mm | Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:124000 N; D:180.0000 mm; d:100.000 mm; Accessories:Two Shields & Snap-R; B:34.00 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2400 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; |
| INA ZARN3585-TV Bearing | da min.:50 mm; Reference speed:20000 r/min; Da max.:70 mm; r1,2 min.:1 mm; Basic static load rating C0:14.6 kN; D1 ≈:65.25 mm; Calculation factor kr:0.025; Limiting speed:13000 r/min; d:45 mm; Basic dynamic load rating C:22.1 kN; |
| Single Row Cylindrical Roller Bearing NU2216 | d:120.000 mm; Basic Static Radial Load Rating Co:146000 N; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:3100 rpm; Grease Speed Rating Open/Shielded n1:2500 rpm; D:190.0000 mm; B:32.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:123000 N; |
| NU2340ECMA Cylindrical Roller Bearings | Locating ring:2 x FRB 10/600; H2:120 mm; Labyrinth seal:2 x TS 92; Taconite seal:2 x TK 92; Ca:220 mm; Q120°:4200 kN; Initial grease fill, 20%:6.4 kg; Da:600 mm; Lock nut:HM 3080; ba max.:203 mm; |