| NU416 Cylindrical Roller Bearing 80*200*48mm | K:12 mm; F:600 mm; D1 ≈:684.2 mm; Basic static load rating C0:27000 kN; Mass bearing:630 kg; Design variant/feature:BC4.10/W33WI; r3,4 min.:2 mm; b:22.3 mm; r1,2 min.:15 mm; C:510 mm; |
| N315ECP, N315ECM Cylindrical Roller Bearing | h:31.75 mm; ba:34.131 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:298.3 N·m; J max.:279.4 mm; H1:88.9 mm; P150°:44.5 kN; Bearing limiting speed:6000 r/min; A2:133.35 mm; Initial grease fill:87.885 g; |
| NJ1044M Bearing | Speed Rating-Open and Shielded-Oil OSO:18700 rpm; Fillet Radius ra:2.00 mm; D:120.0000 mm; Basic Radial Load Rating-Static SCO:67000 N; Fillet Radius rb:1.00 mm; Basic Radial Load Rating-Dynamic DC:93600 N; Speed Rating-Open and Shielded-Grease OSG:12900 rpm; d:55.000 mm; Type:300-RDM Series (from; B:29.00 mm; |
| Cylindrical Roller Bearings 316890B | Eb:162 mm; Shaft washer:WS 81224; Reference speed:800 r/min; Basic static load rating C0:1000 kN; Limiting speed:1600 r/min; Fatigue load limit Pu:96.5 kN; Housing washer:GS 81224; Mass roller and cage thrust assembly:0.58 kg; d:120 mm; Roller and cage thrust assembly:K 81224 TN; |
| NU411, NU411E, NU411M Cylindrical Roller Bearing | B:38.1 mm; G:M16; Housing material:Composite for food a; End cover:ECL 206; G1:21 mm; Limiting speed with shaft tolerance h6:3800 r/min; A5:26.5 mm; A:34 mm; d:30.163 mm; Grub (set) screw G2:1/4-28 UNF; |
| SL18 4918 Full Complement Cylindrical Roller Bearings 90x125x35mm | d:609.6 mm; Mass bearing:695 kg; B:479.425 mm; Basic static load rating C0:27500 kN; r3,4 min.:6.4 mm; D:813.562 mm; Comparative axial load rating CFa:457 kN; T:479.425 mm; Design variant/feature:TQOS/GWISI; Calculation factor e:0.37; |
| 81152 Thrust Cylindrical Roller Bearings | Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:2600 rpm; d:80.000 mm; Basic Static Radial Load Rating Co:220000 N; B:78.00 mm; |
| Cylindrical Roller Bearing N 308 E | Tolerance housing:H7; d:16 mm; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:0.009 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; D:20 mm; |