| No. | Brand | M | l | L | G | J | b | F | t |
| 9mm | - | - | - | - | - | - | - | - | - |
| 51106 | NSK | - | - | - | - | - | - | - | - |
| 34860 | - | - | - | - | - | - | - | - | - |
| 3782/3720 | koyo | - | - | - | - | - | - | - | - |
| 3/8" | - | - | - | - | - | - | - | - | - |
| ZX450 | - | - | - | - | - | - | - | - | - |
| 9mmx2440x1220mm | - | - | - | - | - | - | - | - | - |
| 6311 | NTN | - | - | - | - | - | - | - | - |
| Listing52x | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| (BDZ-138) | - | - | - | - | M 160x3 | - | - | - | - |
| (5pcs) | - | - | - | - | - | - | - | - | - |
| 5432 | - | - | - | - | - | - | - | - | - |
| 1973 | John Deere | - | - | - | - | - | - | - | - |
| NJ222ECP | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 23PC | - | - | - | - | M 160x3 | - | - | - | - |
| 71907 | SKF | - | - | - | - | - | - | - | - |
| UG232NL, | Link-Belt | - | - | - | - | - | - | - | - |
| 2.2mm, | - | - | - | - | - | - | - | - | - |
| W3209SS-1ZY-C5Z+940L | NSK | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 1971-1978 | Timken | - | - | - | - | - | - | - | - |
| 0.787"x | - | - | - | - | - | - | - | 155 mm | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| 16034 | NSK | - | - | - | - | - | - | - | - |
| 4JB1 | - | - | - | - | - | - | - | - | - |
| 17 mm x 47 mm x 14 mm NU 422 Bearing 110*280*65MM | d:110.000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Without Accessories; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Static Radial Load Rating Co:73500 N; B:28.00 mm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:81800 N; D:170.0000 mm; Size (mm):17 mm x 47 mm x 14 mm ; |
| FC5274200 Bearing | Mass rod end:1.85 kg; G:M 39x3; Basic dynamic load rating C:100 kN; l2 max.:199 mm; d:40 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; Basic static load rating C0:140 kN; l1 min.:86 mm; |
| NU1004 Cylindrical Roller Bearing 20*42*12mm | P90°:150 kN; N1:15 mm; H1:60 mm; Fatigue load limit Pu:9.3 kN; Limiting speed:2050 r/min; P0°:150 kN; Grub screws:3 x M 6; A5:22 mm; P55°:250 kN; da:35 mm; |
| NCF2972V Single-row Full-roller Cylindrical Bearing | ra max.:2 mm; Operating clearance factor k2:0.105; Limiting speed:2600 r/min; B:74 mm; Da max.:269 mm; da max.:223 mm; Basic static load rating C0:1340 kN; Mass bearing + sleeve:23 kg; Ca min.:2 mm; d1:160 mm; |
| FC2842155K/C9YA3 172828U Mill Four Row Cylindrical Roller Bearing | Bearing:1313 EKTN9; L:330.2 mm; Housing:SAF 613; H2:31.75 mm; End plug (suffix Y):EPR 7; h:36.513 mm; P60°:83.2 kN; P180°:31.6 kN; R2:21.431 mm; Cap bolt:2 x 5/8-11 UNC; |
| NU211EM.C3 Bearing 55*100*21mm | Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:312000 N; Fillet Radius rb:1.00 mm; d:80.000 mm; Basic Static Radial Load Rating Co:340000 N; B:96.00 mm; D:200.0000 mm; Grease Speed Rating n1:2500 rpm; Oil Speed Rating n2:3300 rpm; |
| NN3022/P5 Double Row Cylindrical Roller Bearing | Basic Dynamic Radial Load Rating C:95200 N; Basic Static Radial Load Rating Co:95000 N; D:110.0000 mm; B:47.60 mm; Grease Speed Rating n1:4000 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5300 rpm; Accessories:Two Shields & Snap-R; d:50.000 mm; Sealed Speed Rating n3:4000 rpm; |
| NN3007K Bearing 35X62X20mm | Calculation factor kr:0.16; Basic static load rating C0:3050 kN; Da min.:299 mm; db min.:299 mm; Da max.:422.6 mm; s max.:3.5 mm; da max.:294 mm; d:240 mm; r1,2 min.:4 mm; Fatigue load limit Pu:275 kN; |
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
NCF 18/530 V Single Row Full Cylindrical Roller Bearing Video