| SL 18 4936 Bearing | Reference speed:8500 r/min; Limiting speed:9500 r/min; Fw:50 mm; Basic dynamic load rating C:23.8 kN; Basic static load rating C0:55 kN; Mass needle roller and cage assembly:0.035 kg; U:17 mm; Ew:55 mm; Fatigue load limit Pu:6.55 kN; |
| HSB016EX2/D Bearing 80x125x22mm | Bearing limiting speed:1500 r/min; Labyrinth ring:2 x LOR 664; P120°:249 kN; H2:101.6 mm; RG:1 NPT; Cap bolt, SAE grade:8; R1:163.512 mm; h:87.313 mm; H1:250.825 mm; Adapter sleeve assembly:SNW 140x7.1/8; |
| SL014838 Cylindrical Roller Bearings 190x240x50mm | Rubber seating ring:RIS 208 A; Mass complete bearing:0.65 kg; Basic dynamic load rating C:24.7 kN; s1:30.2 mm; Thread grub screw G2:5/16-24 UNF; Hexagonal key size for grub screw N:3.969 mm; C:21 mm; Fatigue load limit Pu:0.8 kN; Calculation factor f0:14; D:80 mm; |
| NJ218, NJ218E, NJ218M, NJ218ECP, NJ218-E-TVP2 Cylindrical Roller Bearing | l3 min.:19 mm; Basic static load rating C0:51 kN; G:M 14x1.5; d2 max.:55 mm; N1 max.:17 mm; Basic dynamic load rating C:30 kN; h1:58 mm; d4 max.:25 mm; dk:29 mm; Tightening torque bolt with internal hexagon:25 N·m; |
| N2238 Worm Gear Bearing | Basic Dynamic Radial Load Rating C:2510 N; d:10.000 mm; Grease Speed Rating Open/Shielded n1:34000 rpm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:40000 rpm; D:22.0000 mm; Basic Static Radial Load Rating Co:1120 N; B:6.00 mm; Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:19000 rpm; |
| SL014830 Cylindrical Roller Bearings 150x190x40mm | Basic Static Radial Load Rating Co:8500 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; B:14.00 mm; Basic Dynamic Radial Load Rating C:14200 N; D:47.0000 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; d:17.000 mm; |
| NN 3019 K/W33 Cylindrical Roller Bearings 95x145x37 | ra max.:2.5 mm; Fatigue load limit Pu:64 kN; B:60 mm; Reference speed:3200 r/min; Da max.:166 mm; Misalignment factor k1:0.105; Limiting speed:4300 r/min; Ba min.:7 mm; Da min.:141 mm; r1,2 min.:3 mm; |
| SL182219 Cylindrical Roller Bearing 95x170x43mm | J min.:206.375 mm; RG:1/8 NPT; h:30.163 mm; Pa:4.45 kN; Ca:39.014 mm; ba:27.781 mm; H:147.637 mm; H1:76.2 mm; Cap bolt, SAE grade:5; Mass pillow block:10.5 kg; |