| Cylindrical Roller Bearing NU 409 E | Accessories:Seal & Snap-Ring; Grease Speed Rating Open/Shielded n1:3200 rpm; Basic Dynamic Radial Load Rating C:153000 N; D:200.0000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; B:45.00 mm; Basic Static Radial Load Rating Co:118000 N; Oil Speed Rating n2:3800 rpm; Sealed Speed Rating n3:2200 rpm; Grease Speed Rating n1:3200 rpm; |
| 502894B/314190 Four Row Cylindrical Roller Bearings For Rolling Mills | d1 ≈:1495 mm; Basic static load rating C0:55000 kN; Mass bearing:3550 kg; B:400 mm; r1,2 min.:12 mm; Basic dynamic load rating C:21600 kN; Calculation factor kr:0.14; d:1320 mm; Da min.:1747 mm; Axial load factor Y:0; |
| NJ309, NJ309E, NJ309M, NJ309ECP,NJ309ETVP2 Cylindrical Roller Bearing | H2:63.5 mm; Eye bolt:2 x 3/8-16 UNC; ba:77.787 mm; P150°:80.1 kN; End plug (suffix Y):EPR 16; Max. speed for PosiTrac Plus seal:1075 r/min; A2:215.9 mm; PosiTrac Plus contact element:2 x B10724-125; P60°:230 kN; L:539.75 mm; |
| SL185010 Bearing | J1:114.3 mm; R2:42.069 mm; End plug (suffix Y):EPR 16; A2:273.05 mm; da:136.525 mm; Cap bolt recommended tightening torque:271.2 N·m; ba:87.313 mm; Cap bolt:4 x 7/8-9 UNC; PG:1/4 NPT; H1:200.025 mm; |
| NCF29/500V Single Row Full Complete Cylindrical Roller Bearing | Oil Speed Rating Open/Shielded n2:3100 rpm; Grease Speed Rating Open/Shielded n1:2500 rpm; Sealed Speed Rating n3:1800 rpm; Accessories:Seal & Snap-Ring; d:100.000 mm; Basic Static Radial Load Rating Co:200000 N; B:60.00 mm; Basic Dynamic Radial Load Rating C:225000 N; Fillet Radius ra:3.00 mm; D:265.0000 mm; |
| NJ212ET Bearing 60x110x22mm | h:38.1 mm; P120°:16 kN; Bearing:1311 EKTN9; Mass pillow block:12.4 kg; H2:30.163 mm; J min.:206.375 mm; P90°:25.8 kN; Housing:SAF 611; R1:44.45 mm; PG:1/8 NPT; |
| SL183015 Cylindrical Roller Bearing 75x115x30mm | D1:906 mm; Basic dynamic load rating C:4000 kN; Basic static load rating C0:27000 kN; H:130 mm; Da max.:928 mm; da min.:1032 mm; Minimum axial load factor A:58; Fatigue load limit Pu:1500 kN; Mass bearing:210 kg; Reference speed:150 r/min; |
| N1011-K-HS-PVPA-SP-H193 Bearing 55x90x18mm | d2:648 mm; Associated spanner:TMFN 600-750; Lock washer / Locking clip:MS 31/600-560; d3:750 mm; h:25 mm; Associated eyebolt for handling:M 12; B5:110 mm; b:45 mm; d1:690 mm; G:Tr 600x6; |