| NUP2218, NUP2218E, NUP2218M, NUP2218ECP, NUP2218-E-TVP2 Cylindrical Roller Bearing | d:170.000 mm; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:345000 N; Oil Speed Rating n2:2200 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:490000 N; B:84.00 mm; Fillet Radius rb:1.00 mm; D:260.0000 mm; |
| NJ2856M Bearing 280x350x42mm | Fillet Radius ra:2.00 mm; D:190.0000 mm; Basic Static Radial Load Rating Co:305000 N; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:270000 N; Grease Speed Rating n1:2600 rpm; d:105.000 mm; Oil Speed Rating n2:3000 rpm; B:72.00 mm; |
| 12 mm x 28 mm x 8 mm SL014836 Cylindrical Roller Bearings 180x225x45mm | Calculation factor e:0.22; b:13.9 mm; Mass bearing + sleeve:23.2 kg; d3:230 mm; r1,2 min.:2.1 mm; Ba min.:9 mm; Basic dynamic load rating C:884 kN; B1:109 mm; K:7.5 mm; B2:34 mm; Size (mm):12 mm x 28 mm x 8 mm ; |
| SL183012 Cylindrical Roller Bearing 60x95x26mm | Da:289.999 mm; End plug (suffix Y):EPR 16; Appropriate attachment bolt size G:1 in; A1:158.75 mm; H1:169.875 mm; Initial grease fill:793.8 g; P180°:145 kN; S:4.763 mm; H:338.137 mm; R2:33.337 mm; |
| NU2309E Cylindrical Roller Bearing 45*100*36mm | Mass bearing:1.18 kg; da min.:107 mm; Preload class C GC:1440 N; Db max.:144.4 mm; rb max.:1 mm; db min.:107 mm; Calculation factor fHC:1.01; Calculation factor f2A:1; Static axial stiffness, preload class B:154 N/µm; D2:136 mm; |
| NUP218, NUP218E, NUP218M, NUP218ECP, NUP218-E-TVP2 Cylindrical Roller Bearing | S:4.763 mm; PosiTrac Plus contact element:2 x B10724-113; P120°:72.5 kN; Cap bolt:2 x 1-8 UNC; da:103.188 mm; Stabilizing ring:SR-24-20; Cap bolt recommended tightening torque:400 N·m; P180°:81.4 kN; J1:69.85 mm; End plug (suffix Y):EPR 14; |
| SL192312 Cylindrical Roller Bearings 60x130x46mm | Ca min.:6 mm; Limiting speed:6000 r/min; Dimension series:3EE; r3,4 min.:1.5 mm; d:60 mm; ra max.:2 mm; Calculation factor Y:1.5; C:29 mm; da max.:69 mm; r1,2 min.:2 mm; |
| NF 646 Cylindrical Roller Bearing | Static (Cor):22.3 mm; Pu:3880 kN; rs (min):5 mm; Dynamic (Cr):12 mm; with tapered bore:530 min-1; d:320 mm; B:208 mm; Grease:6520 kN; D:580 mm; with cylindrical bore:450 min-1; |