| NU232 Cylindrical Roller Bearing 160x290x48mm | r2 min.:7.5 mm; Mass plain bearing:2690 kg; d:900 mm; D:1250 mm; da min.:938 mm; Da min.:1063 mm; Lubricant:Maintenance free &nd; Basic static load rating C0:73500 kN; rb max.:7.5 mm; Specific dynamic load factor K:80 N/mm²; |
| SL 183020 Bearing | Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:6000 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; d:60.000 mm; D:130.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Basic Static Radial Load Rating Co:52000 N; B:31.00 mm; Basic Dynamic Radial Load Rating C:81900 N; |
| Cylindrical Roller NJ2310ECM/C4 Bearing | P90°:136 kN; H:336.55 mm; R1:104.775 mm; Adapter sleeve assembly:SNW 3036x6.1/2; Pa:40 kN; R2:33.337 mm; Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Stabilizing ring:2 x 38151-36; Eye bolt:2 x 3/8-16 UNC; |
| HCN1012-K-PVPA-SP Bearing 60x95x18mm | Designation associated G design radial shaft seal with a low cross-sectional height:G 20x28x4; Basic dynamic load rating C:29.2 kN; Ew:28 mm; Fw:20 mm; Basic static load rating C0:39 kN; Fatigue load limit Pu:4.9 kN; Limiting speed:20000 r/min; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x28x4; Reference speed:18000 r/min; Mass needle roller and cage assembly:0.032 kg; |
| NU310E Cylindrical Roller Bearing 50*110*27mm | Fillet Radius rb:1.00 mm; D:200.0000 mm; d:110.000 mm; Basic Static Radial Load Rating Co:310000 N; Basic Dynamic Radial Load Rating C:265000 N; Fillet Radius ra:2.00 mm; B:76.00 mm; Grease Speed Rating n1:2300 rpm; Oil Speed Rating n2:3000 rpm; |
| NNU4934-S-K-M-SP Bearing 170x230x60 Mm | M2:28 mm; Spring washer in accordance with DIN 128:A 12; M1:5 mm; M:15 mm; Hexagonal head bolt:M 12x25; Mass locking clip:0.067 kg; B:32 mm; M3:14 mm; |
| NJ206 Bearings 30*62*16mm | h:242.5 mm; α:124 °; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v min.:0 m/s; B:350 mm; Mass bushing:24.2 kg; Permissible sliding velocity v max.:0.5 m/s; D:260 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.15; |
| N1044M Cylindrical Roller Bearing | R2:22.225 mm; Bearing:1217 K; P150°:28.5 kN; Max. speed for Taconite seal:1050 r/min; H:180.975 mm; N1:22.225 mm; Adapter sleeve assembly:SNW 17x2.7/8; h:36.513 mm; Pa:7.12 kN; P90°:50.7 kN; |