| NNU4940-S-K-M-SP Bearing 200x280x80 Mm | mounting:Tapped Base; B:41.3 mm; d:30 mm; radial dynamic load capacity:2000 kgf; bore type:Round; radial static load capacity:1150 kgf; base to bore centerline:1.6890 in; base width:38.1 mm; duty type:Normal Duty; D:76.2 mm; housing material:Cast Iron; bolt size:7/16-14; locking device:Set Screw; lubrication type:Lubrication Fitting; seal type:Contact with Slinger; series:UCTB200C4HR23; overall length:101.6 mm; |
| NUP 2220 Cylinderical Roller Bearing | Pu:14.390 kN; D:100 mm; T:27.25 mm; r1s (min):1.5 mm; B:25 mm; r2s (min):0.6 mm; rs (min):2 mm; Static (Coa):118 kN; Dynamic (Ca):107 kN; d2:45 mm; |
| 507339/313822/FC5678200 Four Row Cylindrical Roller Bearings | Mass bearing + sleeve:525 kg; Fatigue load limit Pu:735 kN; B2:75 mm; db min.:623 mm; d2 ≈:685 mm; r1,2 min.:6 mm; Reference speed:400 r/min; B1:289 mm; Basic static load rating C0:11400 kN; d3:700 mm; |
| Single Row Full Complete Cylindrical Roller Bearing NCF1852V | Calculation factor Y0:3.2; d2 ≈:505 mm; Calculation factor Y2:4.8; Calculation factor e:0.21; da max.:505 mm; da min.:463 mm; Basic static load rating C0:6550 kN; ra max.:5 mm; D1 ≈:614 mm; Calculation factor Y1:3.2; |
| 509665 Four Row Cylindrical Roller Bearing With Tapered Bore | Specific static load factor K0:300 N/mm²; Da max.:94.7 mm; Mass plain bearing:1.85 kg; Design (sliding contact surface combination):Steel/steel; da min.:68.3 mm; b1:8 mm; C:47.625 mm; da max.:72.3 mm; Lubricant:Regular relubricatio; r1 min.:0.6 mm; |
| FAG 81120LPB Bearing | Basic Dynamic Radial Load Rating C:212000 N; d:65.000 mm; Grease Speed Rating n1:2700 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:193000 N; B:74.00 mm; D:160.0000 mm; Oil Speed Rating n2:3800 rpm; |
| NJ 238 Machine Tool Spindles Bearing | Fillet Radius ra:0.79 mm; Basic Dynamic Radial Load Rating C:10100 N; D:47.6000 mm; Oil Speed Rating Open/Shielded n2:17000 rpm; Width Plain B:9.5 mm; Accessories:One Shield; Shielded or Sealed B1:12.7 mm; Sealed Speed Rating n3:9600 rpm; Grease Speed Rating Open/Shielded n1:14000 rpm; Basic Static Radial Load Rating Co:5850 N; |
| NU 220 ECM Cylindrial Roller Bearing | Hydraulic nut:HMV 15 E; G:M 75x2; Nut for removal:KM 15; G1:8 mm; B1:43 mm; d:70 mm; d1:65 mm; B2:47 mm; Mass withdrawal sleeve:0.24 kg; |