| NU1022M Bearing 110x170x28mm | with tapered bore:1 100 min-1; with cylindrical bore:850 min-1; Pu:2160 kN; rs (min):4 mm; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; Oil:287.330 kN; Grease:3340 kN; B:128 mm; D:400 mm; |
| NJ2230M Bearing | Hydraulic nut:HMV 28 E; B1:82 mm; d3:180 mm; Mass adapter sleeve assembly:3.05 kg; B:28 mm; d1:125 mm; Lock nut:KMFE 28; d:140 mm; G:M 140x2; |
| NN3056/P4 Double Row Cylindrical Roller Bearing | B:52.40 mm; Accessories:One Seal & Snap-Ring; Fillet Radius ra:2.00 mm; D:160.0000 mm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Basic Static Radial Load Rating Co:120000 N; Grease Speed Rating n1:2400 rpm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:130000 N; |
| N 240 Generators Bearing | da:410 mm; H2:125 mm; Locating ring:2 x FRB 21.5/650; End cover:ETS 88; P90°:4200 kN; A1:390 mm; s:30 mm; bb:155.5 mm; Ca:200 mm; N1:48 mm; |
| NCF1888V Single Row Full Complete Cylindrical Roller Bearing | Limiting speed:1500 r/min; Housing:SYK 505; Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:M6x0.75; Fatigue load limit Pu:0.335 kN; Basic static load rating C0:7.8 kN; H1:36.5 mm; H:71 mm; Mass bearing unit:0.35 kg; End cover:ECY 205; |
| NU240 Cylindrical Roller Bearing 200x360x58mm | N1:19.05 mm; P60°:75.6 kN; H:157.559 mm; da:75 mm; Initial grease fill:68.04 g; A2:118.666 mm; ba:32.544 mm; Pa:19.6 kN; Lock washer:W 15; R2:21.431 mm; |
| INA PWKR 72.2RS Bearing | Oil:165.660 kN; rs (min):3 mm; with cylindrical bore:790 min-1; Dynamic (Cr):7.5 mm; D:340 mm; Static (Cor):13.9 mm; with tapered bore:940 min-1; Pu:1020 kN; d:220 mm; B:90 mm; |
| N202 Bearing 15X35X11mm | D:110.0000 mm; Accessories:Two Seals; Sealed Speed Rating n3:4400 rpm; B:27.00 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:36500 N; Basic Dynamic Radial Load Rating C:63700 N; d:40.000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; |