| NU1080M1 Cylindrical Roller Bearing | Housing:SSAFS 520; h:42.069 mm; Initial grease fill:181.44 g; S:4.763 mm; A1:111.125 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing:22220 EK; H:222.25 mm; R1:58.737 mm; L:387.35 mm; |
| Cylindrical Roller Bearing NJ2204E NU2204E | U:15 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 22x30x4; Ew:30 mm; Fw:22 mm; Basic static load rating C0:23.6 kN; Fatigue load limit Pu:2.8 kN; Reference speed:17000 r/min; Limiting speed:19000 r/min; Basic dynamic load rating C:19 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 22x30x4; |
| FCD4668260 Bearing | ra max.:2.5 mm; da min.:513 mm; Reference speed:380 r/min; Calculation factor Y:0.4; Mass bearing:47 kg; das:536 mm; Calculation factor e:0.3; d:500 mm; Basic dynamic load rating C:1340 kN; Basic static load rating C0:3350 kN; |
| NJ1028-M Bearing 140x210x33mm | Cap bolt, SAE grade:8; P120°:49.8 kN; P180°:52.5 kN; Adapter sleeve assembly:SNW 16x2.11/16; h:31.75 mm; H:174.625 mm; Taconite seal:TER 44; A1:88.9 mm; R1:53.181 mm; End plug (suffix Y):EPR 8; |
| NU2311, NU2311E, NU2311M, NU2311ECP, NU2311ETVP2 Cylindrical Roller Bearing | Basic static load rating C0:1900 kN; Mass bearing:13.4 kg; Fatigue load limit Pu:176 kN; Limiting speed:1200 r/min; Reference speed:1100 r/min; Basic dynamic load rating C:605 kN; r1,2 min.:2.1 mm; C:80 mm; Da max.:389 mm; D:400 mm; |
| NU1006M Bearing 30X55X13mm | P180°:3000 kN; Cap bolt, size:M 36x240; Locating ring:2 x FRB 10/600; J1:220 mm; N4 max.:30 mm; Oil seal:2 x TSD 3172 U; A:395 mm; Cap bolt, rec. tightening torque:600 N·m; P90°:3600 kN; A1:360 mm; |
| 22206CCK/W33 Cylindrical Roller Bearing | Basic Static Radial Load Rating Co:10600 N; Fillet Radius ra:1.50 mm; D:100.0000 mm; Grease Speed Rating n1:4300 rpm; d:55.000 mm; B:25.00 mm; Basic Dynamic Radial Load Rating C:27600 N; |
| Cylindrical Roller Bearing NU319 | Hydraulic nut:HMV 16 E; Lock nut:KMFE 16; G:M 80x2; B:18 mm; d1:69.85 mm; d:80 mm; B1:59 mm; d3:105 mm; Mass adapter sleeve assembly:0.98 kg; |