| 81107TN Thrust Cylindrical Roller Bearings | da:44.4 mm; Limiting speed:12000 r/min; Basic dynamic load rating C:20.5 kN; B:17 mm; d:35 mm; r1,2 min.:0.3 mm; F:40 mm; E:45 mm; ra max.:0.3 mm; s max.:0.8 mm; |
| N1024-K-M1-SP Bearing 120x180x28mm | Attachment bolt diameter G:4 x 22.225; L:247.65 mm; A:88.9 mm; da:101.6 mm; Basic dynamic load rating C:426 kN; S:0.794 mm; A6:31.75 mm; a:5.556 mm; N1:23.813 mm; J:196.85 mm; |
| NU209, NU209E,NU209M, NU209ECP, NU209ETVP2 Cylindrical Roller Bearings | d:42 mm; B:20 mm; F:47 mm; Mass inner ring:0.053 kg; r, r1,2 min.:0.3 mm; |
| NJ340ECMA, NJ340EM, NJ340M Bearing 200x420x80mm | d:75.000 mm; Basic Static Radial Load Rating Co:140000 N; B:68.30 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:168000 N; Oil Speed Rating n2:3600 rpm; Accessories:Two Shields; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; D:160.0000 mm; |
| FCD4870220 Bearing | Cap bolt recommended tightening torque:203.4 N·m; Labyrinth ring:2 x LOR 107; A2:165.1 mm; J max.:368.3 mm; PG:1/4 NPT; S:4.763 mm; Da:200 mm; R1:67.866 mm; P90°:89 kN; RG:3/8 NPT; |
| FAG 81256MB Bearing | Ca:102.794 mm; RG:3/4 NPT; P60°:226 kN; h:52.388 mm; Labyrinth ring:2 x LOR 147; P180°:94.3 kN; Max. speed for PosiTrac Plus seal:875 r/min; Eye bolt:2 x 3/8-16 UNC; H2:66.675 mm; Da:279.999 mm; |
| NJ312ECM Cylindrical Roller Bearing | Width A:1.3750 in; Dimension J:1.4375 in; Dimension N:0.6563 in; Dimension S1:0.7813 in; Dimension H:1.0625 in; Dimension L:3.8125 in; Insert Bearing IB:ZMaRC; Shaft Diameter D:1 in; Basic Dynamic Radial Load Rating:3150 lbf; Dimension G:0.4375 in; |
| SL182960 300*420*72MM Bearing | Grease Speed Rating Open/Shielded n1:5000 rpm; Sealed Speed Rating n3:3000 rpm; Accessories:Two Seals & Snap-Rin; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:52700 N; Basic Static Radial Load Rating Co:45000 N; D:130.0000 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; d:85.000 mm; B:22.00 mm; |