| SL182219 Cylindrical Roller Bearing 95x170x43mm | J min.:206.375 mm; RG:1/8 NPT; h:30.163 mm; Pa:4.45 kN; Ca:39.014 mm; ba:27.781 mm; H:147.637 mm; H1:76.2 mm; Cap bolt, SAE grade:5; Mass pillow block:10.5 kg; |
| Full Complete Cylindrical Roller Bearing NCF2930V | Grease:0.850 kN; B:33 mm; Pu:20.000 kN; with cylindrical bore:5 300 min-1; B1:mm; with tapered bore:2216 ; rs Dynamic (Cr):2 mm; Static (Cor):50.470 kN; Oil:4 500 min-1; D:140 mm; |
| NU1026 Bearing 130x200x33mm | Fatigue load limit Pu:455 kN; Da max.:1197 mm; r1,2 min.:6 mm; Calculation factor kr:0.1; Calculation factor e:0.2; Basic dynamic load rating C:2920 kN; Calculation factor Y:0.6; Mass bearing:230 kg; das:1063 mm; da min.:1023 mm; |
| SL024834 Bearing | Oil Speed Rating n2:9500 rpm; Fillet Radius ra:2.50 mm; d:130.000 mm; B:40.00 mm; Grease Speed Rating n1:6000 rpm; D:230.0000 mm; Basic Dynamic Radial Load Rating C:221000 N; Basic Static Radial Load Rating Co:232000 N; Fillet Radius rb:1.00 mm; |
| N1088-K-M1-SP Bearing 440x650x94 Mm | End plug (suffix Y):X-5217-4; Initial grease fill:2154.6 g; Taconite seal:TER 552; P60°:364 kN; h:56.356 mm; H2:85.725 mm; Cap bolt:4 x 7/8-9 UNC; Pa:66.7 kN; Adapter sleeve assembly:SNP 3048x8.15/16; RG:1 NPT; |
| FC3854200 Rolling Mill Bearing | P90°:334 kN; P60°:557 kN; R1:122.237 mm; A1:203.2 mm; H:419.1 mm; Da:359.999 mm; H1:209.55 mm; da:180.975 mm; Ca:107.798 mm; Pa:58.7 kN; |
| Cylindrical Roller NN3020KM/C3 Bearing | a:16.537 mm; Reference speed:5600 r/min; d:65 mm; Basic dynamic load rating C:54.7 kN; Mass bearing:0.32 kg; C:14 mm; r3,4 min.:1 mm; Da min.:83 mm; db min.:73 mm; Db min.:86 mm; |
| SL024836 Bearing | Threads per inch:18; B:12.954 mm; Lock washer:W 11; Lock nut:N 11; B1:46.609 mm; Mass adapter sleeve assembly:0.36 kg; d1:49.212 mm; B4:14.3 mm; G:54.788 mm; d:55 mm; |