| No. | Brand | M | l | L | G | J | b | F | t |
| Nvk45 | - | - | - | 711.2 mm | - | - | - | - | - |
| 6700W | - | - | - | - | - | - | - | - | - |
| 6X4FT, | - | - | - | - | - | - | - | - | - |
| BS1088 | - | - | - | - | - | - | - | - | - |
| N21% | INA | - | - | - | - | - | - | - | - |
| AA21480 | John Deere | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| 660 | NTN | - | - | - | - | - | - | - | - |
| GB05t | - | - | - | - | - | - | - | - | - |
| AT21140 | John Deere | - | - | - | - | - | - | - | - |
| 4.5mm | - | - | - | - | - | - | - | - | - |
| Sk310 | - | - | - | - | M 80x2 | - | - | - | - |
| 6204LU | - | - | - | - | - | - | - | - | - |
| Z1301 | - | - | - | - | - | - | - | - | - |
| 40% | - | - | - | - | - | - | - | - | - |
| 6207 | SKF | - | - | - | - | - | - | - | - |
| 45x84x39 | - | - | - | - | - | - | - | - | - |
| NJ2213 | NSK | - | - | - | - | - | - | - | - |
| 6407 | - | - | - | - | - | - | - | - | - |
| YZ80K | NTN | - | - | - | - | - | 10 mm | - | - |
| 24T | John Deere | - | - | 869.95 mm | - | - | - | - | - |
| 6x12x4mm | - | - | - | - | - | - | - | - | - |
| REGULATOR,808 | - | - | - | - | - | - | - | - | - |
| 304 | INA | - | - | - | - | - | - | - | - |
| 207-27-00282 | INA | - | - | - | - | - | - | - | - |
| (VT215) | - | - | - | - | - | - | - | - | - |
| 5309 | SKF | - | - | - | - | - | - | - | - |
| QRE27352 | John Deere | - | - | - | - | - | - | - | - |
| Cylindrical Roller Bearing NU2310 | Basic Dynamic Radial Load Rating C:59200 N; Oil Speed Rating n2:8000 rpm; D:90.0000 mm; Grease Speed Rating n1:6700 rpm; B:28.00 mm; Basic Static Radial Load Rating Co:17000 N; d:30.000 mm; Fillet Radius ra:1.50 mm; |
| NU244-E-M1 Cylindrical Roller Bearing | J1:82.55 mm; Cap bolt, SAE grade:8; Initial grease fill:765.45 g; RG:1/2 NPT; J min.:371.475 mm; Da:240 mm; da:101.6 mm; Cap bolt recommended tightening torque:1220 N·m; P120°:73.8 kN; H:287.337 mm; |
| NUP207E Roller Bearing | d2:82.3 mm; D1:97.7 mm; Da max.:104 mm; ra max.:1 mm; Calculation factor f2B:1.02; db min.:76 mm; Static axial stiffness, preload class A:212 N/µm; Calculation factor fHC:1.02; r1,2 min.:1.1 mm; B:20 mm; |
| NJ311ET Cylindrical Roller Bearing | D:80.0000 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:34000 N; B:30.20 mm; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:44900 N; Oil Speed Rating n2:7500 rpm; d:40.000 mm; |
| Full Complete Cylindrical Roller Bearing NCF1836V | L:711.2 mm; dc:184.15 mm; Eye bolt:2 x 1/2-13 UNC; Cap bolt:4 x 7/8-9 UNC; Housing:SAW 238; Bearing:23238 CC/W33; N1:34.925 mm; S:4.763 mm; P150°:94.3 kN; ba:92.869 mm; |
| N2964M Cylindrical Roller Bearing | Calculation factor Y2:3.9; Mass bearing + sleeve:12.6 kg; Calculation factor e:0.26; Calculation factor Y1:2.6; K:6 mm; db min.:129 mm; ra max.:2 mm; D1 ≈:194 mm; Da max.:203 mm; Calculation factor Y0:2.5; |
| FAG 81138MB 190 X 240 X 37mm | B1:56.3 mm; d2:62 mm; C:22 mm; Mass complete bearing:0.84 kg; r1,2 min.:1 mm; B:42.8 mm; Hexagonal key size for grub screw N:4.763 mm; Limiting speed1):850 r/min; Thread grub screw G2:3/8-24 UNF; s1:34.9 mm; |
| SL 182217 Bearing | h:80.963 mm; End plug (suffix Y):EPR 24; Lock washer:W 44; Mass pillow block:269 kg; H1:241.3 mm; P60°:423 kN; L:831.85 mm; db:242.887 mm; H:474.663 mm; P180°:173 kN; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
NW1829 Bearing Video