| No. | Brand | M | l | L | G | J | b | F | t |
| LAH25AN | NSK | - | - | - | - | - | - | - | - |
| PC27MR-2 | - | - | - | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | - | - | - | - | - |
| J/S63_ | - | - | - | - | - | - | - | - | - |
| 48” | John Deere | - | - | - | - | - | - | - | - |
| 2mm | - | - | - | - | - | - | - | - | - |
| 43280AA300 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| TRA5182A | - | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| 8-98028737-0 | - | - | - | - | - | - | - | - | - |
| 15 | - | - | - | - | - | - | - | - | - |
| 320C | INA | - | - | - | - | - | - | - | - |
| (JBS610) | - | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | 558.8 mm | - | - | - | - | - |
| 1202 | NTN | - | - | - | - | - | - | - | - |
| 525 | - | - | - | - | - | - | - | - | - |
| 61832 | - | - | - | - | - | - | - | - | - |
| PN16 | Danfoss | - | - | - | - | - | - | - | - |
| TZ350/250 | - | - | - | - | - | - | - | - | - |
| 99.7% | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| NJ2213 | NSK | - | - | - | - | - | - | - | - |
| N1930-K-M1-SP Bearing 150x210x28mm | Mass bearing (including seat washer where applicable):165 kg; Da max.:911 mm; d1 ≈:995 mm; da min.:939 mm; d:850 mm; Limiting speed:450 r/min; Basic dynamic load rating C:1060 kN; Basic static load rating C0:9500 kN; ra max.:3 mm; Minimum load factor A:470; |
| 508726 Four Row Cylindrical Roller Bearing | d:75.000 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:187000 N; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating n1:2600 rpm; D:160.0000 mm; Accessories:Shield & Seal & Snap; B:68.30 mm; Basic Static Radial Load Rating Co:208000 N; Fillet Radius ra:2.00 mm; |
| NCF3060V Bearing | B:16.00 mm; Oil Speed Rating n2:20000 rpm; Basic Dynamic Radial Load Rating C:10600 N; Grease Speed Rating n1:17000 rpm; d:17.000 mm; Basic Static Radial Load Rating Co:2550 N; D:40.0000 mm; Fillet Radius ra:0.60 mm; |
| NU2207 Cylindrical Roller Bearings | P120°:260 kN; P180°:285 kN; A1:222.25 mm; RG:1 NPT; Eye bolt:2 x 1/2-13 UNC; Pa:71.2 kN; PG:1/4 NPT; Bearing:22244 CCK/W33; Da:399.999 mm; ba:90.487 mm; |
| Cylindrical Roller Bearing NU2224ECM | G:M 80x4; Material constant KM:330; Mass rod end:14.5 kg; dk:105 mm; l2 max.:389 mm; α:5 °; Basic dynamic load rating C:400 kN; d:80 mm; C1 max.:48 mm; B:55 mm; |
| NJ2328M Bearing | h:51.594 mm; Cap bolt recommended tightening torque:1220 N·m; Housing:SAF 032 KA; Mass pillow block:79.7 kg; Cap bolt:2 x 1-8 UNC; Labyrinth ring:2 x LOR 131; J1:82.55 mm; P90°:113 kN; H:287.337 mm; H1:152.4 mm; |
| Cylindrical Roller Bearing 21306CCK/W33 | End plug (suffix Y):EPR 19; Cap bolt recommended tightening torque:1220 N·m; Housing:SAFS 234; H2:69.85 mm; Eye bolt:2 x 3/8-16 UNC; Mass pillow block:157 kg; Taconite seal (dc shaft position):TER 148; P90°:207 kN; H1:179.4 mm; dc:163.512 mm; |
| N1968-K-M1-SP Bearing 340x460x56 Mm | Basic Static Radial Load Rating Co:39000 N; Basic Dynamic Radial Load Rating C:47500 N; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:8500 rpm; Grease Speed Rating n1:6300 rpm; B:34.00 mm; D:72.0000 mm; d:35.000 mm; Fillet Radius ra:1.00 mm; |
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
NN3008K Bearing 40X68X21mm Video