| NU414, NU414E, NU414M, NU414M1 Cylindrical Roller Bearing | Labyrinth ring:2 x LOR 120; Cap bolt recommended tightening torque:813.5 N·m; Max. speed for PosiTrac Plus seal:1150 r/min; Cap bolt:7/8-9 UNC; Eye bolt:2 x 3/8-16 UNC; H2:60.325 mm; R1:87.313 mm; J1:85.725 mm; Ca:77.8 mm; Mass pillow block:92.5 kg; |
| N1022-K-HS-PVPA-SP-H193 Bearing 110x170x28mm | Sealed Speed Rating n3:0 rpm; d:190.000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:One Shield; B:24.00 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Basic Dynamic Radial Load Rating C:74100 N; D:240.0000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:91500 N; |
| Cylindrical Roller Bearing NU1007 | D:140 mm; Preload class B GB:580 N; da min.:97 mm; Calculation factor f2B:1.03; d2:105.5 mm; Preload class C GC:1150 N; Mass bearing:1.16 kg; a:27.5 mm; Db max.:134.4 mm; ra max.:1.5 mm; |
| NJ409, NJ409E, NJ409M, NJ409M1 Cylindrical Roller Bearing | Calculation factor e:0.4; Basic static load rating C0:7100 kN; Limiting speed:700 r/min; r1,2 min.:5 mm; Basic dynamic load rating C:4395 kN; d2 ≈:364 mm; B2 ≈:260 mm; K:9 mm; Calculation factor Y0:1.6; G:Tr 340x5; |
| NN3006 Bearing 30X55X19mm | S:0.794 mm; J min.:198.438 mm; Limiting speed:2800 r/min; Basic dynamic load rating C:212 kN; J max.:223.838 mm; H:165.894 mm; s:32.941 mm; H2:57.15 mm; da:74.612 mm; Mass bearing unit:9.53 kg; |
| NNU4976-S-M-SP Cylindrical Roller Bearing 380x520x140 Mm | J min.:91 mm; End cover:ECW 204; Bearing:YAR 204-012-2RF/HV; Thread grub screw G2:1/4-28 UNF; Basic static load rating C0:6.55 kN; Housing material:Composite for food a; H2:16 mm; N1:12.5 mm; Mass bearing unit:0.27 kg; H1:33.3 mm; |
| NN30/850/P4 Double Row Cylindrical Roller Bearing | r1s (min):2.5 mm; D:150 mm; r2s (min):1 mm; d2:70 mm; rs (min):3 mm; Dynamic (Ca):293 kN; Pu:46.850 kN; T:54 mm; Static (Coa):398 kN; C:42 mm; |
| NNF 5014 , SL045014 Full Complete Cylindrical Roller Bearing | Calculation factor X:0.6; Calculation factor Y1:0.66; Mass bearing:0.57 kg; r1,2 min.:1.5 mm; D1 ≈:64.3 mm; d:35 mm; d1 ≈:46.2 mm; r0:0.5 mm; Limiting speed:15000 r/min; Calculation factor Y0:0.58; |