| Cylindrical Roller NJ305ECM Bearing | B:42.00 mm; D:260.0000 mm; d:170.000 mm; Oil Speed Rating n2:2800 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:212000 N; Basic Static Radial Load Rating Co:245000 N; Grease Speed Rating n1:2200 rpm; Fillet Radius rb:1.00 mm; |
| NU2317ECP, NU2317ECJ Cylindrical Roller Bearing | Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.033 kg; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; B1:3 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; B:20 mm; |
| NU2208EM1 Bearing Cylindrical Roller Bearing | B:10.5 mm; h:2 mm; b:5 mm; G:M 30x1.5; Mass lock nut:0.066 kg; d3:45 mm; d1:36 mm; B3:2 mm; Associated spanner:HN 5-6; Axial static load carrying capacity:36.5 kN; |
| Cylindrical Roller Bearing NU3307 | Locking device:MBL 24; Hydraulic nut:HMV 24 E; Mass adapter sleeve assembly:3.3 kg; B:20 mm; d1:106.362 mm; Lock nut:KML 24; d:120 mm; G:M 120x2; B4:22 mm; d3:145 mm; |
| NN3036 Double-row Cylindrical Roller Bearing | J:63.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended diameter for attachment bolts, mm G:10 mm; Thread grub screw G2:1/4-28 UNF; A5:26 mm; Basic static load rating C0:6.55 kN; N:12.3 mm; Mass bearing unit:0.3 kg; Limiting speed:5000 r/min; T:37.3 mm; |
| 545171 Four Row Cylindrical Roller Bearing | Comparative radial load rating CF:815 kN; B:269.875 mm; Comparative axial load rating CFa:129 kN; Thrust factor K:1.83; Basic static load rating C0:8150 kN; Basic dynamic load rating C:3360 kN; Fatigue load limit Pu:680 kN; Design variant/feature:TQON/GW; d:317.5 mm; Mass bearing:105 kg; |
| NU1032M Bearing | r2 min.:0.3 mm; Basic dynamic load rating C:83 kN; D:35 mm; α:9 °; Sealing solution:Triple-lip seals; d:20 mm; Design (sliding contact surface combination):Steel/PTFE fabric; Specific dynamic load factor K:300 N/mm²; B:16 mm; Lubricant:Maintenance free &nd; |
| SL182238 Cylindrical Roller Bearing 190x340x92mm | P150°:222 kN; Ca:147.803 mm; P180°:267 kN; H2:101.6 mm; Initial grease fill:3515.4 g; Stabilizing ring:2 x A8819; Labyrinth ring:2 x LOR 568; da:254 mm; Cap bolt:4 x 1 1/2-6 UNC; Max. speed for PosiTrac Plus seal:575 r/min; |