| SL185020 Cylindrical Roller Bearings 100x150x67mm | Dimension H1:1.6875 in; Height H:3.3750 in; Dimension F:0.6250 in; Width A:1.6250 in; Thread Diameter G:7/16-14; Shaft Diameter D:1 3/16 in; Dimension S1:0.8750 in; Basic Dynamic Radial Load Rating:3510 lbf; Dimension L:4.2500 in; Distance J:3.0000 in; |
| NU2330M Bearing | Accessories:One Seal; Oil Speed Rating Open/Shielded n2:20000 rpm; B:12.00 mm; D:40.0000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Oil Speed Rating n2:20000 rpm; Fillet Radius ra:0.64 mm; Grease Speed Rating n1:17000 rpm; Basic Dynamic Radial Load Rating C:9560 N; Basic Static Radial Load Rating Co:4750 N; |
| Cylindrical Roller Bearing NU305 | Fillet Radius ra:2.00 mm; Accessories:No Shield, no Seal,; Grease Speed Rating n1:2800 rpm; Basic Static Radial Load Rating Co:125000 N; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; Sealed Speed Rating n3:2800 rpm; B:66.70 mm; D:150.0000 mm; Oil Speed Rating n2:3800 rpm; |
| 65 mm x 120 mm x 23 mm SL182218 Cylindrical Roller Bearing 90x160x40mm | N:50 mm; s:30 mm; Taconite seal:2 x TK 76; Bearing (basic designation):23176 K; Locating ring:2 x FRB 10/620; ATK:528 mm; P90°:3900 kN; L:1040 mm; Cap bolt, size:M 36x240; da:360 mm; Size (mm):65 mm x 120 mm x 23 mm ; |
| Cylindrical Roller Bearing N210ETN1 | Fillet Radius ra:2.00 mm; d:90.000 mm; B:30.00 mm; Basic Static Radial Load Rating Co:98000 N; Oil Speed Rating n2:4700 rpm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:112000 N; Grease Speed Rating n1:3600 rpm; |
| NJ2315, NJ2315E, NJ2315M, NJ2315ECP, NJ2315ETVP2 Cylindrical Roller Bearing | D:100 mm; r1s (min):1 mm; Dynamic (Cr):64.305 kN; a:43 mm; B:25 mm; rs (min):1.5 mm; Grease:5 600 min-1; Pu:1.836 kN; Oil:6 700 min-1; d:45 mm; |
| Cylindrical Roller Bearing NU320ECM | J1:85.725 mm; R1:101.6 mm; Eye bolt:3/8-16 UNC; Cap bolt recommended tightening torque:515.2 N·m; ba:71.438 mm; Ca:92.939 mm; Cap bolt, SAE grade:8; N1:28.575 mm; Max. speed for PosiTrac Plus seal:1150 r/min; A2:231.775 mm; |
| Cylindrical Roller NJ2209ECM Bearing | ba:44.45 mm; A1:98.425 mm; P60°:85.9 kN; P150°:28.9 kN; db:92.075 mm; Labyrinth ring (dc shaft position):LOR 60; Bearing limiting speed:4000 r/min; Bearing:22316 E; Mass pillow block:30.4 kg; Cap bolt, SAE grade:8; |