| 100 mm x 180 mm x 34 mm SL182918 Cylindrical Roller Bearing 90x125x22mm | d1:111.125 mm; Lock nut:AN 26; Sleeve:S 26x4.3/8; B4:25.4 mm; Threads per inch:12; Mass adapter sleeve assembly:4.4 kg; B:22.479 mm; Lock washer:W 26; d3 max.:171.577 mm; d:130 mm; Size (mm):100 mm x 180 mm x 34 mm ; |
| NU2307E Cylindrical Roller Bearing 35*80*31mm | Basic Static Radial Load Rating Co:270000 N; D:360.0000 mm; Fillet Radius ra:2.00 mm; B:46.00 mm; d:260.000 mm; Oil Speed Rating Open/Shielded n2:1900 rpm; Accessories:One Seal; Sealed Speed Rating n3:1000 rpm; Basic Dynamic Radial Load Rating C:212000 N; Grease Speed Rating Open/Shielded n1:1600 rpm; |
| 89311TN Thrust Cylindrical Roller Bearings | Mass bushing:0.01 kg; B1:3 mm; Coefficient of friction µ max.:0.15; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; D1:20 mm; B:8 mm; Permissible sliding velocity v max.:0.5 m/s; D:16 mm; d:10 mm; |
| NJ218, NJ218E, NJ218M, NJ218ECP, NJ218-E-TVP2 Cylindrical Roller Bearing | l3 min.:19 mm; Basic static load rating C0:51 kN; G:M 14x1.5; d2 max.:55 mm; N1 max.:17 mm; Basic dynamic load rating C:30 kN; h1:58 mm; d4 max.:25 mm; dk:29 mm; Tightening torque bolt with internal hexagon:25 N·m; |
| NU244-E-M1 Cylindrical Roller Bearing | J1:82.55 mm; Cap bolt, SAE grade:8; Initial grease fill:765.45 g; RG:1/2 NPT; J min.:371.475 mm; Da:240 mm; da:101.6 mm; Cap bolt recommended tightening torque:1220 N·m; P120°:73.8 kN; H:287.337 mm; |
| NF240M Bearing | S:4.763 mm; P150°:80.1 kN; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; PG:1/4 NPT; J min.:431.8 mm; h:50.8 mm; Initial grease fill:623.7 g; A2:279.4 mm; Adapter sleeve assembly:SNW 30x5.3/8; |
| N1856X3M/HG2P6-1 Bearing | r2 min.:0.6 mm; Basic dynamic load rating C:93 kN; Sealing solution:Triple-lip seals; b1:3.1 mm; Specific dynamic load factor K:150 N/mm²; Basic static load rating C0:310 kN; Da max.:44 mm; Design (sliding contact surface combination):Steel/steel; Material constant KM:330; rb max.:0.6 mm; |
| SL014832 Bearing | G:M 39x3; Basic static load rating C0:140 kN; r1 min.:0.6 mm; C1 max.:24 mm; Material constant KM:330; l2 max.:199 mm; B:28 mm; d:40 mm; α:6 °; l1 min.:86 mm; |