| RN203M Cylindrical Roller Bearing | C:23.02 mm; d1 ≈:64.1 mm; Db min.:78 mm; D:82.55 mm; ra max.:0.8 mm; Ca min.:4 mm; Mass bearing:0.78 kg; rb max.:3.3 mm; db min.:45.5 mm; Calculation factor e:0.54; |
| NU2317 Cylindrical Roller Bearing 85*180*60mm | J max.:298.45 mm; P180°:49.8 kN; Cap bolt, SAE grade:5; Housing:SAF 518; P150°:40.5 kN; H:192.484 mm; R2:27.781 mm; ba:34.925 mm; Bearing limiting speed:5300 r/min; Appropriate attachment bolt size G:0.75 in; |
| 533808 Four Row Cylindrical Roller Bearing Fit On Roll Neck | Comparative axial load rating CFa:599 kN; T:200 mm; Comparative radial load rating CF:735 kN; h:32.75 mm; Calculation factor Y0:0.8; D:590 mm; D1 ≈:474 mm; Fatigue load limit Pu:510 kN; Thrust factor K:0.71; Basic static load rating C0:6550 kN; |
| N1020-K-HS-PVPA-SP-H193 Bearing 100x150x24mm | Mass bearing + sleeve:59 kg; B2:34 mm; d1:240 mm; D1 ≈:367 mm; da max.:326 mm; B5:46 mm; B:104 mm; d2 ≈:305 mm; Reference speed:1300 r/min; Ba min.:11 mm; |
| OKB NU309E Cylindrical Roller Bearings | Db max.:121.8 mm; Static axial stiffness, preload class A:52 N/µm; D2:111.4 mm; Calculation factor f1:1; Calculation factor f2C:1.05; Reference grease quantity Gref:10.49 cm³; Calculation factor f2A:1; Calculation factor f0:9.6; Calculation factor fHC:1; Calculation factor f:1.07; |
| FC3450168 Bearing | Appropriate attachment bolt size G:1.5 in; J1:133.35 mm; P60°:423 kN; h:79.375 mm; Cap bolt recommended tightening torque:400 N·m; N1:41.275 mm; Stabilizing ring:SR-44-38; J max.:708.025 mm; P150°:145 kN; Cap bolt:4 x 1-8 UNC; |
| Four Row Cylindrical Roller Bearing FC3650156/P5 | Grease Speed Rating Open/Shielded n1:7000 rpm; Sealed Speed Rating n3:4800 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; B:20.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Basic Static Radial Load Rating Co:23200 N; d:50.000 mm; Basic Dynamic Radial Load Rating C:35100 N; D:90.0000 mm; |
| FC3446180 Bearing | ba:32.544 mm; P180°:23.1 kN; Taconite seal (dc shaft position):TER 37; Appropriate attachment bolt size G:0.625 in; P60°:60.5 kN; Stabilizing ring:2 x SR-1613; N1:19.05 mm; Ca:57.785 mm; Housing:FSAF 313; R1:53.181 mm; |