| Cylindrical Roller Bearing NU206E | B5:51.841 mm; G:319.075 mm; Threads per inch:6; B:42.316 mm; Sleeve:S 3164x11.15/16; Mass adapter sleeve assembly:33.5 kg; Hydraulic nut:HMVC 64E; B1:231.165 mm; d:320 mm; d3 max.:381.127 mm; |
| NU1928 Cylindrical Roller Bearing | Tolerance shaft:h8; Tolerance housing:H7; D:10 mm; d:6 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; B:4 mm; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.001 kg; |
| NJ 626 Cylindrical Roller Bearing | Pa:14 kN; P120°:32 kN; PG:1/8 NPT; Cap bolt:2 x 3/4-10 UNC; P90°:51.6 kN; J max.:320.675 mm; RG:3/8 NPT; J min.:269.875 mm; Cap bolt, SAE grade:8; Initial grease fill:181.44 g; |
| NNU4920/W33 Bearing 100x140x40 | Sealed Speed Rating n3:3800 rpm; Oil Speed Rating Open/Shielded n2:6700 rpm; Accessories:Two Shields & Snap-R; d:55.000 mm; Oil Speed Rating n2:6700 rpm; D:120.0000 mm; Grease Speed Rating Open/Shielded n1:5600 rpm; Grease Speed Rating n1:5600 rpm; Basic Static Radial Load Rating Co:45000 N; Fillet Radius ra:2.00 mm; |
| 532001 Four Row Cylindrical Roller Bearing For Interference Fit On The Roll Neck | Calculation factor f2B:1.03; a:40.2 mm; r3,4 min.:1 mm; Calculation factor f2A:1; dn:115.4 mm; Ball diameter Dw:12.7 mm; Static axial stiffness, preload class B:319 N/µm; Calculation factor (back-to-back, face-to-face) X2:0.67; Da max.:138 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; |
| NU 312 ECJ Cylindrical Roller Bearing | Calculation factor kr:0.23; s max.:3.9 mm; D1 ≈:425 mm; da min.:334 mm; F:364 mm; D:460 mm; db min.:368 mm; Basic static load rating C0:3600 kN; d:320 mm; Limiting speed:1400 r/min; |
| NJ214, NJ214E, NJ214M, NJ214ECP, NJ214ETVP2 Cylindrical Roller Bearing | Calculation factor f0:8.1; da min.:44.6 mm; C1:4.5 mm; Attainable speed for oil-air lubrication:56000 r/min; a:14.8 mm; Basic static load rating C0:7.65 kN; Preload class B GB:200 N; r1,2 min.:1 mm; Calculation factor f1:1; rb max.:0.6 mm; |
| NU207ECP/E/EM | G3:13 mm; B5:125 mm; B1:358 mm; A:10 mm; Hydraulic nut:HMV 200E; Lock nut:HM 30/1000; G2:G 1/8; Mass adapter sleeve assembly:424 kg; G:Tr 1000x8; d3:1140 mm; |