| No. | Brand | M | l | L | G | J | b | F | t |
| SZ366-55011 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 40cm | - | - | - | - | - | - | - | - | - |
| 497 | Timken | - | - | - | M 130x2 | - | - | - | - |
| 16DC | - | - | - | - | - | - | - | - | - |
| MDD090B-N-020-N2M-110PA0 | Rexroth | - | - | - | - | - | - | - | - |
| NUP2224EXLM1C3 | fag | - | - | - | - | - | - | - | - |
| (5mm/6mm/8mm/9mm/11mm/21mm) | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | 628.65 mm | - | - | - | - | - |
| 10pcs | - | - | - | - | Tr 340x5 | - | - | - | - |
| 7220-00601 | - | - | - | 560 mm | - | - | - | - | - |
| RD200 | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | 95 mm | - | - | - | - | - |
| MT-02T-11 | DAIKIN | - | - | - | - | - | 22.3 mm | - | - |
| 10 | - | - | - | 361.95 mm | - | - | - | - | - |
| 33115 | - | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | 16.7 mm | 351 mm | - |
| PLB6848F-1 | - | - | - | - | - | - | - | - | - |
| 02.50C2HR19A1.000 | Parker | - | - | - | - | - | - | - | - |
| BS1088 | - | - | - | - | - | - | - | - | - |
| 567411 | - | - | - | - | - | - | - | - | - |
| 6208LLUC3/EM | NTN | - | - | - | - | - | - | - | - |
| 4WE10Q31/CW110N9DK | Rexroth | - | - | - | - | - | - | - | - |
| 6201C3 | NSK | - | - | 349.25 mm | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| E305 | - | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| UCX13-40 | koyo | - | - | - | - | - | - | - | - |
| Cylindrical Roller Bearing NU332ECMA/C3 | l1 min.:68 mm; Material constant KM:330; Basic dynamic load rating C:120 kN; Mass rod end:1.3 kg; d2 max.:84 mm; h:130 mm; r1 min.:0.6 mm; dk:47 mm; d:35 mm; l2 max.:174 mm; |
| NCF3076V Single-row Full-roller Cylindrical Bearing | B:12 mm; d1:125 mm; Mass shaft washer:0.79 kg; r1,2 min.:1.1 mm; d:70 mm; |
| FC4058130 Bearing | R2:46.038 mm; Initial grease fill:2154.6 g; H:422.275 mm; Stabilizing ring:SR-40-34; dc:193.675 mm; L:749.3 mm; P180°:145 kN; S:4.763 mm; db:222.25 mm; Eye bolt:2 x 1/2-13 UNC; |
| SL182208 Cylindrical Roller Bearings 40x80x23mm | r5 min.:1 mm; T:119 mm; Limiting speed:2600 r/min; Da max.:246.5 mm; ra max.:3 mm; Calculation factor Y1:1.9; d:120 mm; Reference speed:1600 r/min; Calculation factor e:0.35; Ca min.:8 mm; |
| SL192308 Cylindrical Roller Bearings 40x90x33mm | K:5 mm; Fatigue load limit Pu:375 kN; r1,2 min.:3 mm; Limiting speed:750 r/min; ra max.:2.5 mm; das:352 mm; Da max.:425 mm; d:320 mm; Basic dynamic load rating C:1760 kN; D:440 mm; |
| Cylindrical Roller Bearing NU1004M | r3,4 min.:4 mm; B1:14 mm; d:130 mm; B2:23 mm; d1 ≈:182 mm; Mass angle ring:1.65 kg; |
| NUP209, NUP209E, NUP209M, NUP209ECP, NUP209ETVP2 Cylindrical Roller Bearing | da:93.662 mm; H2:61.913 mm; J1:57.15 mm; A:114.3 mm; B:80.169 mm; H:217.488 mm; Limiting speed:2200 r/min; H1:107.95 mm; Mass bearing unit:22.9 kg; S:0.794 mm; |
| 81217TN Thrust Cylindrical Roller Bearings | Thread grub screw G2:M10x1; J7:15.5 mm; J min.:119 mm; A:45 mm; J6:146 mm; N4:4 mm; L:160 mm; Recommended diameter for attachment bolts, inch G:0.5 in; End cover:ECY 207; H:93 mm; |
FC3452120 Bearing Video