| SL 18 3080 Bearing | Basic dynamic load rating C:212 kN; Mass bearing unit:9.53 kg; B:65.484 mm; H1:82.55 mm; A:68.263 mm; H2:57.15 mm; da:74.612 mm; J min.:198.438 mm; H:165.894 mm; L:265.113 mm; |
| FC3653180 Bearing | Stabilizing ring:2 x SR-1517; Mass pillow block:16.5 kg; Ca:45.796 mm; Initial grease fill:218.29 g; Da:150 mm; P180°:25.4 kN; H2:31.75 mm; RG:3/8 NPT; P90°:36.9 kN; P120°:23.1 kN; |
| N217, N217E, N217M, N217ECP, N217-E-TVP2 Cylindrical Roller Bearing | Fillet Radius ra:3.00 mm; Oil Speed Rating n2:3200 rpm; B:60.00 mm; D:265.0000 mm; d:100.000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:290000 N; Basic Dynamic Radial Load Rating C:276000 N; Grease Speed Rating n1:2400 rpm; |
| NU 234 Bent Axles Of Diesel Engines Bearing | Basic Dynamic Radial Load Rating C:117000 N; Basic Static Radial Load Rating Co:102000 N; D:150.0000 mm; Fillet Radius ra:2.00 mm; B:35.00 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Two Shields & Snap-R; d:60.000 mm; Oil Speed Rating Open/Shielded n2:4600 rpm; |
| NN3038/UP Double Row Cylindrical Roller Bearing | Limiting speed:5000 r/min; Mass bearing:3.7 kg; Fatigue load limit Pu:31.5 kN; Calculation factor kr:0.15; Basic static load rating C0:290 kN; D1 ≈:199.05 mm; r1,2 min.:2.1 mm; Axial load factor Y:0.6; Fw:169.5 mm; C:35 mm; |
| Full Completed Cylindrical Roller Bearing NCF2960V SL182960 | B2 ≈:117 mm; B:90 mm; G:M 180x3; Da max.:249 mm; s1 max.:17.1 mm; s2 max.:7.2 mm; Operating clearance factor k2:0.103; D:260 mm; B1:106 mm; Fatigue load limit Pu:173 kN; |
| N315ECP, N315ECM Cylindrical Roller Bearing | h:31.75 mm; ba:34.131 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:298.3 N·m; J max.:279.4 mm; H1:88.9 mm; P150°:44.5 kN; Bearing limiting speed:6000 r/min; A2:133.35 mm; Initial grease fill:87.885 g; |
| SL014852 Bearing | G1:46 mm; Mass withdrawal sleeve:88.5 kg; B2:272 mm; G:Tr 670x6; B1:258 mm; Nut for removal:HM 30/670; d1:600 mm; A:11 mm; d:630 mm; Hydraulic nut:HMV 134 E; |