| NU1060 Cylindrical Roller Bearing | Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6700 rpm; Basic Dynamic Radial Load Rating C:60500 N; Basic Static Radial Load Rating Co:43000 N; D:90.0000 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:5000 rpm; Grease Speed Rating n1:5000 rpm; d:40.000 mm; B:39.70 mm; |
| FC4062206 Bearing | D:260 mm; b:13.5 mm; ra max.:1 mm; Mass plain bearing:18.5 kg; Design (sliding contact surface combination):Steel/steel; r2 min.:1.1 mm; B:105 mm; Basic dynamic load rating C:2280 kN; da min.:191 mm; d:180 mm; |
| 531597 Cylindrical Roller Bearing | B:104 mm; Dynamic (Cr):7.5 mm; with cylindrical bore:1 000 min-1; d:190 mm; Static (Cor):13.9 mm; Grease:2180 kN; Oil:200.760 kN; Pu:1310 kN; with tapered bore:1 400 min-1; rs (min):3 mm; |
| NNU4224x1 Bearing 120x215x86mm | d2 ≈:301 mm; D:440 mm; B2 ≈:179 mm; Calculation factor Y2:3.3; r1,2 min.:4 mm; Basic static load rating C0:3900 kN; Basic dynamic load rating C:2664 kN; Fatigue load limit Pu:290 kN; Da max.:423 mm; B:144 mm; |
| NU1010M/P6 Cylindrical Roller Bearing | Housing:SAF 517; Da:150 mm; da:76.2 mm; Bearing:1217 K; Max. speed for PosiTrac Plus seal:1950 r/min; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:149.1 N·m; RG:3/8 NPT; P180°:34.7 kN; L:330.2 mm; |
| Cylindrical Roller Bearing NU2230E.M1 | Grease Speed Rating Open/Shielded n1:22000 rpm; Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:6890 N; Basic Static Radial Load Rating Co:3100 N; B:10.00 mm; Oil Speed Rating n2:28000 rpm; Oil Speed Rating Open/Shielded n2:28000 rpm; d:12.000 mm; Grease Speed Rating n1:22000 rpm; Accessories:Snap-Ring; |
| 81144 Thrust Cylindrical Roller Bearings | Static (Coa):108 kN; r1s (min):1.5 mm; Dynamic (Ca):76.4 kN; r2s (min):0.6 mm; B:23 mm; a:20 mm; T:23 mm; D:90 mm; Pu:13.170 kN; d2:55 mm; |
| Cylindrical Roller NJ2212E.M1 Bearing | Calculation factor f2C:1.05; Da max.:43.8 mm; Static axial stiffness, preload class C:46 N/µm; Static axial stiffness, preload class D:64 N/µm; Static axial stiffness, preload class B:33 N/µm; d:25 mm; r3,4 min.:0.3 mm; da min.:28.2 mm; Db max.:45 mm; Ball diameter Dw:6.35 mm; |