| No. | Brand | M | l | L | G | J | b | F | t |
| 7L | INA | - | - | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 6D114 | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 80% | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 344/110 | Rexroth | - | - | - | - | - | - | - | - |
| GR650 | - | - | - | - | - | - | - | - | - |
| 6003CM | NSK | - | - | - | - | - | - | - | - |
| 32304 | Nachi | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 34CrNiMo6 | - | - | - | 265.113 mm | - | - | - | - | - |
| PC300-8 | - | - | - | - | M 75x2 | - | - | - | - |
| 7015E.U.P4/7015E.U.M.P4,75x115x20,Deep | - | - | - | 330.2 mm | - | - | - | - | - |
| 23992CAK/C3W33 | - | - | - | - | - | - | - | - | - |
| 5210 | - | - | - | - | - | - | - | - | - |
| N210 | NSK | - | - | 176 mm | - | - | - | - | - |
| M63810 | John Deere | - | - | - | - | - | - | - | - |
| NCP2_ | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| AS201-008 | NTN | - | - | - | - | - | - | - | - |
| (15mm/18mm) | - | - | - | - | - | - | - | - | - |
| 2846--GiggleSticks | - | - | - | - | - | - | - | - | - |
| E39 | - | - | - | - | - | - | - | - | - |
| (JS-SSN31) | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 81222TN Thrust Cylindrical Roller Bearings | ba:72.231 mm; J max.:488.95 mm; P180°:94.3 kN; N1:28.575 mm; J1:95.25 mm; RG:3/4 NPT; Pa:36.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Taconite seal:TER 118; S:4.763 mm; |
| NJ313ECP, NJ313E.TVP2, NJ313 Bearing 65x140x33mm | Coefficient of friction µ min.:0.03; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; D:190 mm; Specific dynamic load factor K:140 N/mm²; Effective load carrying cross section A:20060 mm²; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:h8; B:120 mm; Mass bushing:1.27 kg; |
| SL04300-PP Bearing | B:54.00 mm; Basic Dynamic Radial Load Rating C:198000 N; d:90.000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Accessories:Two Shields & Snap-R; D:225.0000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:212000 N; Oil Speed Rating Open/Shielded n2:3000 rpm; |
| 507336/313823 Rolling Mills Bearings | D1 ≈:736.1 mm; da min.:583 mm; Fatigue load limit Pu:30.5 kN; Calculation factor X:0.39; Calculation factor Y0:0.66; r1,2 min.:6 mm; rb max.:2.5 mm; d1 ≈:648.1 mm; Calculation factor kr:0.085; Calculation factor Y1:0.78; |
| N338M Bearing | Oil Speed Rating n2:3800 rpm; Accessories:One Seal & Snap-Ring; B:63.50 mm; D:150.0000 mm; Sealed Speed Rating n3:2800 rpm; Basic Dynamic Radial Load Rating C:172000 N; Basic Static Radial Load Rating Co:186000 N; d:70.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2800 rpm; |
| 89326 Thrust Cylindrical Roller Bearings | d:50 mm; Limiting speed:7000 r/min; Ca min.:5 mm; Da max.:82 mm; Calculation factor Y1:1.7; Mass bearing pair:1.77 kg; Calculation factor e:0.4; ra max.:1.5 mm; D:90 mm; Da min.:77 mm; |
| NU1008M 40*68*13mm | Material constant KM:330; d:45 mm; Mass rod end:2.45 kg; h:163 mm; C1 max.:28 mm; Basic static load rating C0:200 kN; l1 min.:92 mm; dk:60 mm; l7 min.:50 mm; B:32 mm; |
| NNU4028x1-2 Bearing 140x210x77.5mm | Accessories:One Shield; Sealed Speed Rating n3:1400 rpm; Basic Dynamic Radial Load Rating C:190000 N; D:280.0000 mm; Basic Static Radial Load Rating Co:200000 N; Grease Speed Rating Open/Shielded n1:2000 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; B:46.00 mm; d:180.000 mm; |
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
FC3652180 Mill Four Row Cylindrical Roller Bearing 180x260x180mm Video