| No. | Brand | M | l | L | G | J | b | F | t |
| MAC112C-0-HD-3-C/130-A-0/S005, | Rexroth | - | - | - | - | - | - | - | - |
| 779500 | - | - | - | - | - | - | - | - | - |
| 12" | - | - | - | - | - | - | - | - | - |
| 3077715 | INA | - | - | - | - | - | - | - | - |
| MFA-03-X-11 | YUKEN | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | 22.3 mm | 670 mm | - |
| 23028-E1A-M | fag | - | - | - | - | - | - | - | - |
| mdd071a-n-060-n2s-095gb1 | Rexroth | - | - | - | - | - | - | - | - |
| R4 | TRW | - | - | - | - | - | - | - | - |
| 51107 | - | - | - | - | - | - | - | - | - |
| 23T | - | - | - | - | 104.699 mm | - | - | - | - |
| 2206 | NSK | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | - | - |
| [20 | - | - | - | - | - | - | - | - | - |
| EC290B | - | - | - | - | - | - | - | - | - |
| e0 | - | - | - | - | - | - | - | - | - |
| 32314 | - | - | - | - | - | - | 16.7 mm | - | - |
| SB-PTS04 | - | - | - | - | - | 133.35 mm | - | - | - |
| 99.5% | - | - | - | 330.2 mm | - | - | - | - | - |
| 90 | - | - | - | - | - | - | - | - | - |
| 71813ACD/HCP4 | SKF | - | - | - | - | - | - | - | - |
| 512580B 200x290x192 | J6:127 mm; Housing material:Cast iron; A5:29.5 mm; s1:27.5 mm; Hexagonal key size for grub screw N:3 mm; N4:2 mm; H:189 mm; d2:72 mm; Housing:FYTB 510 M/VZ033; A1:15 mm; |
| HCN1008-K-PVPA-SP-H193 Bearing 40x68x15mm | Fillet Radius ra:0.79 mm; D:41.3000 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:16000 rpm; Basic Static Radial Load Rating Co:5100 N; Shielded or Sealed B1:11.1 mm; Width Plain B:7.9 mm; d:19.100 mm; Basic Dynamic Radial Load Rating C:9360 N; |
| NU1038 Planetary Stranders Bearing | Basic dynamic load rating C:31 kN; N:6.8 mm; Da max.:53 mm; Angle between holes in outer ring (Pitch) α:30 °; Preload:2250 N; J:63 mm; da min.:40 mm; r3,4 min.:0.6 mm; Number of attachment bolts:11; Basic static load rating C0:69.5 kN; |
| NU256M, NU256ECMA, NU256E.M1 Bearing 280x500x80mm | C:17 mm; da:49.2 mm; Limiting speed:10000 r/min; Basic dynamic load rating C:21.6 kN; Da:50.5 mm; r1,2 min.:0.3 mm; Db:45.6 mm; D:55 mm; ra max.:0.3 mm; Fatigue load limit Pu:5.6 kN; |
| Short Cylindrical Roller Bearing NU1009M | B:25.40 mm; X-L-O Part Number:57-17; Grease Speed Rating Max. n1:2000 rpm; Preload:90 lb; Keyway f:1.6 mm; Fillet Radius ra:1.00 mm; d:26.990 mm; Oil Speed Rating Max. n2:4000 rpm; Oil Mist Speed Rating Max. n3:6000 rpm; Keyway e:27.5 mm; |
| NUP2210, NUP2210E, NUP2210M, NUP2210ECP, NUP2210ETVP2 Cylindrical Roller Bearing | Basic static load rating C0:228 kN; Basic dynamic load rating C:79.2 kN; Reference speed:4300 r/min; Fw:95 mm; Limiting speed:5000 r/min; Mass needle roller and cage assembly:0.27 kg; U:40 mm; Ew:103 mm; Fatigue load limit Pu:28.5 kN; |
| 35 mm x 80 mm x 21 mm SL014856 Cylindrical Roller Bearings 280x350x69mm | B:23.80 mm; Oil Speed Rating n2:9500 rpm; Basic Dynamic Radial Load Rating C:28600 N; Grease Speed Rating n1:7000 rpm; D:62.0000 mm; d:30.000 mm; Sealed Speed Rating n3:7000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:20400 N; Fillet Radius ra:1.00 mm; Size (mm):35 mm x 80 mm x 21 mm ; |
| SL024968 Cylindrical Roller Bearings 340x460x118mm | Pa:14.1 kN; N1:19.05 mm; ba:47.625 mm; P150°:34.7 kN; Max. speed for Taconite seal:950 r/min; H:192.484 mm; J min.:263.525 mm; Cap bolt:2 x 5/8-11 UNC; Initial grease fill:141.75 g; h:38.1 mm; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller NUP209NR Bearing Video