| 81211TN Thrust Cylindrical Roller Bearings | Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Static Radial Load Rating Co:90000 N; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:2.00 mm; d:55.000 mm; B:33.00 mm; Grease Speed Rating Open/Shielded n1:4100 rpm; D:140.0000 mm; |
| NJ2315ECP, NJ2315ECM Cylindrical Roller Bearing | Adapter sleeve assembly:SNW 36x6.1/2; P180°:202 kN; P120°:196 kN; Housing:SSAFS 536; Ca:95.809 mm; Bearing:22236 CCK/W33; S:4.763 mm; R1:114.3 mm; Max. speed for PosiTrac Plus seal:875 r/min; Stabilizing ring:SR-36-30; |
| SL 18 3034 Bearing | D:340.0000 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; Basic Static Radial Load Rating Co:290000 N; B:56.00 mm; Basic Dynamic Radial Load Rating C:247000 N; Grease Speed Rating Open/Shielded n1:1800 rpm; Sealed Speed Rating n3:1100 rpm; d:220.000 mm; Accessories:Seal & Snap-Ring; Fillet Radius ra:2.50 mm; |
| NU208ECP/E/EM | RG:3/8 NPT; S:4.763 mm; P120°:59.6 kN; Cap bolt recommended tightening torque:149.1 N·m; J max.:295.275 mm; P60°:157 kN; End plug (suffix Y):EPR 11; J1:53.975 mm; R2:27.781 mm; Housing:FSAFS 518; |
| HCN1019-K-PVPA-SP Bearing 95x145x24mm | da max.:110 mm; s max.:6 mm; Basic static load rating C0:540 kN; da min.:104 mm; Reference speed:3800 r/min; rb max.:2.5 mm; Mass bearing:9.46 kg; D1 ≈:161.1 mm; ra max.:2.5 mm; Calculation factor kr:0.25; |
| N230 Cylindrical Roller Bearing | B:12 mm; Mass adapter sleeve assembly:0.44 kg; Locking device:MB 13; Lock nut:KM 13; Hydraulic nut:HMV 13 E; B4:13.5 mm; d:65 mm; d1:57.15 mm; d3:85 mm; B1:40 mm; |
| N1030-K-M1-SP Bearing 150x225x35mm | Diameter G:0.4063 in; Dimension C:2.0625 in; Dimension F:0.5000 in; Weight W:1.30 lb; Distance J:1.8750 in; Basic Static Radial Load Rating Co:2520 lbf; Basic Dynamic Radial Load Rating:3510 lbf; Shaft Diameter D:1 1/4 in; Pin Dia BS:3/8; Dimension S1:1.0000 in; |
| NU314-E-M1 Cylindrical Roller Bearing | J max.:600.075 mm; Cap bolt, SAE grade:5; P180°:89 kN; A1:180.975 mm; Max. speed for PosiTrac Plus seal:875 r/min; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:144 kg; H2:76.2 mm; Da:319.999 mm; R2:41.275 mm; |