| No. | Brand | M | l | L | G | J | b | F | t |
| 2015 | - | - | - | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | - | - | - | - | - |
| 02534585000 | Danfoss | - | - | - | - | - | - | - | - |
| 211-7895 | - | - | - | - | - | - | - | - | - |
| 16PC | - | - | - | - | - | - | - | 482 mm | - |
| 627 | NSK | - | - | - | - | - | - | - | - |
| 16PC | - | - | - | - | - | - | - | - | - |
| 34412866 | - | - | - | - | - | - | - | - | - |
| (131.45.2240) | - | - | - | - | - | - | - | - | - |
| ABEC3 | - | - | - | - | - | - | - | - | - |
| 39SH4C | - | - | - | - | - | - | - | - | - |
| TM40 | INA | - | - | - | - | - | - | - | - |
| 6.5mm | - | - | - | - | - | - | - | - | - |
| Hm60 | - | - | - | - | - | - | - | - | - |
| 3mm | INA | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 7ton~9ton | Komatsu | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | Tr 480x5 | - | 36 mm | - | - |
| 6207 | SKF | - | - | - | - | - | - | - | - |
| 210K | FAFNIR | - | - | - | - | - | - | - | - |
| 16034 | NSK | - | - | - | - | - | - | - | - |
| AISI316 | - | - | - | - | - | - | - | - | - |
| 603zz | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 6WG1 | - | - | - | - | - | - | - | - | - |
| K3V112DTP1AMR-9TEL-V | - | - | - | - | - | - | - | - | - |
| 689 | NSK | - | - | - | - | - | - | - | - |
| 51106 | NSK | - | - | - | - | - | - | - | - |
| PVD-1B-34P-11G5 | - | - | - | - | - | - | - | - | - |
| NCF18/670V Single-row Full-roller Cylindrical Bearing | Max. speed for Taconite seal:440 r/min; End plug (suffix Y):EPR 21; P120°:107 kN; H2:79.375 mm; N1:34.925 mm; J min.:549.275 mm; P90°:173 kN; Cap bolt, SAE grade:5; A1:190.5 mm; J1:114.3 mm; |
| 518214 Four Row Cylindrical Roller Bearing | Specific static load factor K0:45 N/mm²; d:10 mm; D1:20 mm; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; Mass bushing:0.014 kg; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; |
| NU2348ECMA Cylindrical Roller Bearings | d1:400 mm; Mass shaft washer:29.6 kg; r1,2 min.:5 mm; B:41 mm; d:200 mm; |
| Cylindrical Roller Bearing NJ 410 ECP, NJ 410 ECM, NJ 410 ECJ | Basic static load rating C0:355 kN; Calculation factor Y0:0.66; Mass bearing:14.4 kg; D1 ≈:440.15 mm; a:142 mm; Calculation factor A:1.12; d:380 mm; Calculation factor X:0.63; Db max.:475 mm; Basic dynamic load rating C:190 kN; |
| NJ208EM Roller Bearing | Basic Static Radial Load Rating Co:4150 N; Accessories:Two Seals; d:25.000 mm; Fillet Radius ra:0.30 mm; B:9.00 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Grease Speed Rating Open/Shielded n1:16000 rpm; Sealed Speed Rating n3:10000 rpm; D:42.0000 mm; Basic Dynamic Radial Load Rating C:6630 N; |
| NJ 414 Cylindrical Roller Bearing | Oil Speed Rating Open/Shielded n2:2600 rpm; D:280.0000 mm; B:46.00 mm; Basic Static Radial Load Rating Co:200000 N; Grease Speed Rating Open/Shielded n1:2000 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:190000 N; Accessories:One Seal; Sealed Speed Rating n3:1400 rpm; d:180.000 mm; |
| 532470 Four Row Cylindrical Roller Bearing Fit On Roll Neck | Oil Speed Rating n2:8500 rpm; Basic Static Radial Load Rating Co:39000 N; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:47500 N; D:72.0000 mm; d:35.000 mm; Fillet Radius ra:1.00 mm; B:34.00 mm; Fillet Radius rb:0.60 mm; |
| FC3452120 Mill Four Row Cylindrical Roller Bearing | Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:3250 N; Basic Static Radial Load Rating Co:1360 N; Sealed Speed Rating n3:23000 rpm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; d:7.000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; B:7.00 mm; D:22.0000 mm; |
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
N1912-K-M1-SP Bearing 60x85x13mm Video