No. | Brand | M | l | L | G | J | b | F | t |
Mic51 | - | - | - | - | - | - | - | - | - |
650 | NTN | - | - | - | - | - | - | - | - |
23228CCK/W33 | SKF | - | - | - | - | - | - | - | - |
4mm | - | - | - | - | - | - | - | - | - |
2na | - | - | - | - | - | - | - | - | - |
E1 | - | - | - | - | - | - | - | - | - |
22 | - | - | - | - | - | - | - | - | - |
30-14 | INA | - | - | - | 499.008 mm | - | - | - | - |
1500X1300mm | - | - | - | - | - | - | - | - | - |
NN3036ASK.M.SP.C3 | fag | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
81XA/81XXH | - | - | - | - | - | - | - | - | - |
120x215x76 | - | - | - | - | - | - | - | - | - |
6x17x6mm | - | - | - | - | - | - | - | - | - |
N21%, | - | - | - | - | - | - | - | - | - |
ZX120 | - | - | - | - | - | - | - | - | - |
22219EX | Nachi | - | - | - | - | - | - | - | - |
28mm | - | - | - | - | - | - | - | - | - |
600 | - | - | - | - | - | - | - | - | - |
99.3% | - | - | - | - | - | - | - | 723 mm | - |
GX20818 | John Deere | - | - | - | - | - | - | - | - |
6206VVC3E | NSK | - | - | 558.8 mm | - | - | - | - | - |
QRE27352 | John Deere | - | - | - | - | - | - | - | - |
5710200100 | Rexroth | - | - | - | - | - | - | - | - |
2x | TRW | - | - | 234.95 mm | - | - | - | - | - |
NJ2309, NJ2309E, NJ2309M, NJ2309ECP, NJ2309ETVP2 Cylindrical Roller Bearing | Fatigue load limit Pu:153 kN; b1:7 mm; das:157 mm; K:4 mm; da min.:151 mm; Limiting speed:1800 r/min; Basic static load rating C0:1370 kN; rb max.:1 mm; Da max.:200 mm; Reference speed:1400 r/min; |
NNU4121/W33 Bearing 105x175x69 | Ca:49.809 mm; Cap bolt, SAE grade:5; J min.:263.525 mm; J1:53.975 mm; Stabilizing ring:2 x SR-1518; L:349.25 mm; R2:27.781 mm; H:192.484 mm; P120°:38.3 kN; End plug (suffix Y):EPR 11; |
NU212E, NU212 ,NU212M Cylindrical Roller Bearing | L:285.75 mm; Da:130 mm; Adapter sleeve assembly:SNW 15x2.7/16; P60°:104 kN; Initial grease fill:68.04 g; R2:21.431 mm; Cap bolt:2 x 1/2-13 UNC; Mass pillow block:14.3 kg; Taconite seal:TER 37; Cap bolt recommended tightening torque:149.1 N·m; |
NU2340ECMA Cylindrical Roller Bearings | Locating ring:2 x FRB 10/600; H2:120 mm; Labyrinth seal:2 x TS 92; Taconite seal:2 x TK 92; Ca:220 mm; Q120°:4200 kN; Initial grease fill, 20%:6.4 kg; Da:600 mm; Lock nut:HM 3080; ba max.:203 mm; |
NU2215MA Cylindrical Roller Bearing | Grease:35 000 min-1; rs:0.2 mm; Da:14 max; da:9.8 min; Oil:42 000 min-1; Bearing designation:618/8TNH ; Pu:0.033 kN; Weight:0.003 kg; D:16 mm; B:4 mm; |
NU1032 Bearing 160x240x38mm | r1,2 min.:0.3 mm; Basic dynamic load rating C:10.1 kN; Limiting speed:20000 r/min; Reference speed:18000 r/min; Da:26.3 mm; da:25.6 mm; Fw:22 mm; D:30 mm; Basic static load rating C0:16.3 kN; Mass bearing:0.027 kg; |
N1013-C-K-HS-PVPA-SP Bearing 65x100x18mm | d:70.000 mm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:125000 N; B:39.70 mm; Basic Dynamic Radial Load Rating C:101000 N; Accessories:No Shield, no Seal; D:125.0000 mm; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; |
NU318ECM/C3 Cylindrical Roller Bearing 90X190X43mm | Mass bearing:285 kg; r1,2 min.:3 mm; T:368 mm; D1 ≈:542 mm; Calculation factor Y2:3; Basic static load rating C0:16300 kN; d:450 mm; D:595 mm; Comparative radial load rating CF:1460 kN; B:368 mm; |
NN3024KTN9/SPW33 Cylindrical Roller Bearing 120x180x46mm Video