No. | Brand | M | l | L | G | J | b | F | t |
12mm | - | - | - | - | - | - | - | - | - |
6BG1 | - | - | - | - | - | - | - | - | - |
N318W | NSK | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
125cc | INA | - | - | - | - | - | - | - | - |
30216 | SKF | - | - | - | - | - | 10 mm | 84 mm | - |
2211TV | fag | - | - | - | - | - | - | - | - |
12-18mm | - | - | - | - | - | - | - | - | - |
6313 | NTN | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
1000 | fag | - | - | - | - | - | 60 mm | - | - |
CL08-28.5N | - | - | - | - | - | - | - | 182 mm | - |
NU1036ML | - | - | - | - | - | - | - | - | - |
4BH | - | - | - | - | - | - | 1.9 mm | - | - |
53177 | Bower | - | - | - | - | - | - | - | - |
4LE1 | - | - | - | - | - | - | - | - | - |
42X30 | - | - | - | - | - | - | - | - | - |
5 | - | - | - | - | - | - | 8.3 mm | - | - |
SSEM20 | Thomson | - | - | - | - | - | 3.1 mm | - | - |
Factory-E0 | - | - | - | - | - | - | - | - | - |
MSK040C-0600-NN-S1-UG1-NNNN | Rexroth | - | - | - | - | - | - | - | - |
1000 | - | - | - | - | - | - | - | - | - |
SL1V027wo | - | - | - | - | - | - | - | - | - |
6302 | SKF | - | - | - | - | - | - | - | - |
4'x8' | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
7 | - | - | - | - | - | - | - | - | - |
N1021M Bearing | Appropriate attachment bolt size G:1.25 in; Bearing limiting speed:2000 r/min; P180°:113 kN; N1:34.925 mm; Eye bolt:2 x 1/2-13 UNC; L:711.2 mm; Housing:SAF 044 KA; Cap bolt recommended tightening torque:271.2 N·m; H1:200.025 mm; P150°:94.3 kN; |
NUP230M Bearing | Oil Speed Rating Open/Shielded n2:13000 rpm; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:14600 N; B:17.00 mm; Basic Dynamic Radial Load Rating C:23300 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; d:17.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; |
SL19 2317 C3 Cylindrical Roller Bearings 85x180x60mm | s1 max.:31.2 mm; Limiting speed:3200 r/min; Misalignment factor k1:0.093; Ca min.:-7.5 mm; Basic dynamic load rating C:980 kN; Da min.:216 mm; Da max.:263 mm; r1,2 min.:4 mm; ra max.:3 mm; Operating clearance factor k2:0.122; |
NU217E Bearing 85x150x28mm | L:511.175 mm; P150°:85.9 kN; Bearing:22228 CCK/W33; P120°:94.3 kN; Adapter sleeve assembly:SNW 28x4.7/8; Housing:SAF 528; Cap bolt recommended tightening torque:400 N·m; A1:149.225 mm; Stabilizing ring:SR-28-0; J1:85.725 mm; |
NNF 5016 , SL045016 Cylindrical Bearing Without Outer Ring | Mass needle roller and cage assembly:0.039 kg; Fatigue load limit Pu:6.1 kN; Ew:47 mm; Reference speed:10000 r/min; Basic static load rating C0:50 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 40x47x4; Limiting speed:11000 r/min; Designation associated G design radial shaft seal with a low cross-sectional height:G 40x47x4; Fw:40 mm; Basic dynamic load rating C:28.6 kN; |
81216TN Thrust Cylindrical Roller Bearings | d2:75 mm; r1s (min):1.5 mm; C:27 mm; T:33.25 mm; Pu:26.630 kN; a:30 mm; r2s (min):0.6 mm; rs (min):2 mm; D:130 mm; Static (Coa):220 kN; |
NU315ECP 75*160*37mm | r3,4 min.:3 mm; D:780 mm; Basic dynamic load rating C:12800 kN; α:20 °; Basic static load rating C0:32500 kN; Calculation factor kr:740; Fatigue load limit Pu:2400 kN; d:530 mm; K:12 mm; C:570 mm; |
518206 Four Row Cylindrical Roller Bearing | r1 min.:1 mm; C1 max.:48 mm; d2 max.:182 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; G:M 80x4; l7 min.:88 mm; l4 max.:389 mm; B:55 mm; Mass rod end:15 kg; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
N1017-K-HS-PVPA-SP-H193 Bearing 85x130x22mm Video