| NU224 Cylindrical Roller Bearing 120x215x40mm | Cap bolt, SAE grade:5; h:39.688 mm; N1:22.225 mm; da:107.95 mm; P150°:40 kN; P90°:71.2 kN; J min.:295.275 mm; PG:1/4 NPT; Max. speed for PosiTrac Plus seal:1350 r/min; A2:155.575 mm; |
| NU2340M Bearing | B1:5 mm; Tolerance housing:H7; d:45 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; D:55 mm; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; D1:65 mm; Mass bushing:0.3 kg; |
| Full Complete Cylindrical Roller Bearing NCF1840V | Da max.:694 mm; Da min.:613 mm; Limiting speed:850 r/min; Reference speed:630 r/min; D:720 mm; Ca min.:7.5 mm; Operating clearance factor k2:0.099; B:226 mm; r1,2 min.:6 mm; D1 ≈:647 mm; |
| NF208 Cylindrical Roller Bearing 40*80*18mm | Hydraulic nut:HMV 15 E; G:M 75x2; d:75 mm; B:16 mm; d3:98 mm; Mass adapter sleeve assembly:0.82 kg; d1:65 mm; Lock nut:KMFE 15; B1:55 mm; |
| Roller Bearings Roll Neck Bearings 313924A | Accessories:Two Seals; Grease Speed Rating Open/Shielded n1:3400 rpm; d:80.000 mm; Fillet Radius ra:2.50 mm; Sealed Speed Rating n3:2300 rpm; B:48.00 mm; D:200.0000 mm; Basic Dynamic Radial Load Rating C:163000 N; Oil Speed Rating Open/Shielded n2:4000 rpm; Basic Static Radial Load Rating Co:125000 N; |
| NJ 240 Generator Bearing | D:12 mm; Permissible sliding velocity v min.:0.25 m/s; B:10 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; |
| SL185006 Bearing | Mass bearing:260 kg; rb max.:4 mm; K:9 mm; Da max.:560 mm; F:402 mm; Fatigue load limit Pu:620 kN; r3,4 min.:5 mm; Limiting speed:1200 r/min; Reference speed:950 r/min; B:243 mm; |
| INA NUKR 47 Bearing | F:150 mm; B:50 mm; d:130 mm; Mass inner ring:1.69 kg; r, r1,2 min.:1.5 mm; |