| NU2304 ECP Cylindrical Roller Bearing | Oil Speed Rating Max. n2:8000 rpm; B:25.40 mm; X-L-O Part Number:55-27; Grease Speed Rating Max. n1:5000 rpm; Fillet Radius ra:1.00 mm; Keyway f:1.6 mm; Preload:50 lb; Oil Mist Speed Rating Max. n3:12000 rpm; D:50.8000 mm; d:20.640 mm; |
| Cylindrical Roller Bearing NU 2313 ECP, NU 2313 ECM, NU 2313 ECJ | Da min.:54 mm; Dimension series:15000; r1,2 min.:3.6 mm; T:18.161 mm; ra max.:3.6 mm; rb max.:2 mm; Limiting speed:11000 r/min; Calculation factor Y:1.7; Db min.:58 mm; Calculation factor e:0.35; |
| SL185024 Cylindrical Roller Bearings 120x180x80mm | B:200 mm; Mass bushing:2.11 kg; Coefficient of friction µ min.:0.03; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:200 N/mm²; D:190 mm; Effective load carrying cross section A:33660 mm²; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.08; Tolerance housing:H7; |
| NNU4048/P4 Double Row Cylindrical Roller Bearing | d:45.000 mm; B:25.00 mm; D:100.0000 mm; Basic Dynamic Radial Load Rating C:39000 N; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:13400 N; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:6300 rpm; |
| NU2340M+HJ2340 Bearing | Oil Speed Rating n2:12000 rpm; Basic Static Radial Load Rating Co:14600 N; d:20.000 mm; Basic Dynamic Radial Load Rating C:22500 N; B:25.40 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:8500 rpm; D:52.0000 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8500 rpm; |
| FC4464210A Bearing | Mass bearing (including seat washer where applicable):0.33 kg; R:50 mm; r1,2 min.:1 mm; d1 ≈:60 mm; D2:45 mm; C:7 mm; Basic dynamic load rating C:35.8 kN; Fatigue load limit Pu:2.4 kN; d:30 mm; da min.:48 mm; |
| SL 18 2992 Bearing | Mass:1.35 kg; d5:134 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 18-20; b:10 mm; B:32 mm; d1:130 mm; Grub (set) / Locking screw size:M 6; d3:135 mm; G:M 105x2; Recommended tightening torque:14.2 N·m; |
| N 650 Cylindrical Roller Bearing | a:163 mm; H1:45 mm; da min.:63 mm; Angle between bolts and thread holes α/2:15 °; Fatigue load limit Pu:10 kN; J:113 mm; Angle between holes in outer ring (Pitch) α:30 °; Frictional moment:2.6 N·m; d:50 mm; H:54 mm; |