| NU209M Roller Bearing | Cap bolt recommended tightening torque:298.3 N·m; h:42.069 mm; P180°:57.4 kN; da:85.725 mm; End plug (suffix Y):EPR 12; P90°:84.5 kN; Labyrinth ring:2 x LOR 101; PG:1/4 NPT; Bearing limiting speed:4500 r/min; Housing:SSAFS 520; |
| Cylindrical Roller Bearings 316890B | Eb:162 mm; Shaft washer:WS 81224; Reference speed:800 r/min; Basic static load rating C0:1000 kN; Limiting speed:1600 r/min; Fatigue load limit Pu:96.5 kN; Housing washer:GS 81224; Mass roller and cage thrust assembly:0.58 kg; d:120 mm; Roller and cage thrust assembly:K 81224 TN; |
| SL04 5017 PP Cylindrical Roller Bearings 85x130x60mm | D:160.0000 mm; Fillet Radius ra:2.00 mm; Accessories:Shield & Seal; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:79300 N; Oil Speed Rating Open/Shielded n2:4800 rpm; B:26.00 mm; d:105.000 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; Basic Static Radial Load Rating Co:65500 N; |
| NJ414, NJ414E, NJ414M, NJ414M1 Cylindrical Roller Bearing | B:52.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1900 rpm; Basic Static Radial Load Rating Co:390000 N; d:180.000 mm; Basic Dynamic Radial Load Rating C:302000 N; Oil Speed Rating n2:2400 rpm; Fillet Radius ra:3.00 mm; D:320.0000 mm; |
| NJ424M Bearing 120x310x72mm | G:M 72x4; l7 min.:85 mm; d:70 mm; Material constant KM:330; h:265 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; C1 max.:43 mm; Basic dynamic load rating C:315 kN; dk:92 mm; |
| NU 205ECP Cylindrical Roller Bearings | Basic Static Radial Load Rating Co:125000 N; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2800 rpm; Accessories:Two Seals; Oil Speed Rating n2:3800 rpm; B:63.50 mm; Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; d:70.000 mm; |
| UY1307TAM Full Complement Cylindrical Roller Bearings | Eye bolt, size:2 x M 42; J:1000 mm; Pa:2400 kN; Q180°:2900 kN; bc:243.5 mm; J6:1070 mm; Q120°:5800 kN; Taconite seal:2 x TK 30/530; Locating ring:2 x FRB 30.5/680; P120°:3400 kN; |
| 75 mm x 130 mm x 25 mm SL04 5008 PP Cylindrical Roller Bearings 40x68x38mm | Bearing:23244 CCK/W33; Cap bolt, SAE grade:5; A2:304.8 mm; Appropriate attachment bolt size G:1.5 in; h:80.963 mm; Mass pillow block:284 kg; Cap bolt recommended tightening torque:400 N·m; Max. speed for PosiTrac Plus seal:725 r/min; PG:1/4 NPT; RG:1 NPT; Size (mm):75 mm x 130 mm x 25 mm ; |