| No. | Brand | M | l | L | G | J | b | F | t |
| ,2 | - | - | - | - | Tr 360x5 | - | - | - | - |
| LBCR50-2LS | SKF | - | - | - | - | - | 11.1 mm | - | - |
| 22310EX | Nachi | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 304 | - | - | - | - | - | - | - | - | - |
| 6207 | SKF | - | - | - | - | - | - | - | - |
| L85407206B | Parker | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | 349.25 mm | - | - | - | - | - |
| 380 | - | - | - | - | - | - | - | - | - |
| CSF32-XRB | - | - | - | - | - | - | - | - | - |
| (4 | - | - | - | - | - | - | - | - | - |
| WSA2 | - | - | - | - | - | - | - | - | - |
| MDD090B-N-020-N2M-110PA0 | Rexroth | - | - | - | - | - | - | - | - |
| 4-Shelf | - | - | - | - | - | - | - | - | - |
| 350 | NTN | - | - | - | - | - | - | - | - |
| P3W227U | Rexnord | - | - | - | - | 53 mm | - | - | - |
| 10x | - | - | - | - | - | - | - | - | - |
| 99150 | SKF | - | - | - | - | - | - | - | - |
| K3V112dt | - | - | - | - | - | - | - | - | - |
| 6004ZZC3 | koyo | - | - | - | - | - | - | 661 mm | - |
| 10 | - | - | - | - | - | - | - | - | - |
| s.200762 | - | - | - | - | - | - | - | - | - |
| NJ328M Bearing | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:29000 N; Oil Speed Rating n2:9000 rpm; B:23.00 mm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:47500 N; d:30.000 mm; D:90.0000 mm; Fillet Radius rb:1.00 mm; |
| NN3148 NN3148K Cylindrical Roller Bearing | Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; D:9 mm; Tolerance housing:H7; d:6 mm; B:4 mm; |
| NU1052MA Cylindrical Roller Bearing | Taconite seal:TER 53; H:182.166 mm; Pa:9.25 kN; R2:22.225 mm; L:330.2 mm; N1:19.05 mm; Cap bolt, SAE grade:5; PG:1/8 NPT; Max. speed for Taconite seal:1050 r/min; J max.:279.4 mm; |
| 89424 Thrust Cylindrical Roller Bearings | Grease:1 300 min-1; d:160 mm; H:31 mm; d1:198 mm; dynamic Cr:133.750 kN; D1:162 mm; rs (min):1 mm; D:200 mm; static Cor:476.000 kN; Pu:16.130 kN; |
| ZARF35110-TV Thrust Roller Bearings 35x110x66mm | D:90.0000 mm; d:50.000 mm; Basic Static Radial Load Rating Co:9150 N; B:20.00 mm; Basic Dynamic Radial Load Rating C:26500 N; Oil Speed Rating n2:8500 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7000 rpm; |
| NU1030 Bearing 150x225x35mm | s max.:4.7 mm; d1 ≈:154 mm; Limiting value e:0.2; Basic dynamic load rating C:165 kN; Axial load factor Y:0.6; r1,2 min.:2 mm; F:148 mm; D:200 mm; db min.:158 mm; da min.:137 mm; |
| FC3652168/YA3 Mill Four Row Cylindrical Roller Bearing 180x260x168mm | Fillet Radius ra:2.00 mm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:101000 N; d:60.000 mm; Fillet Radius rb:1.00 mm; B:31.00 mm; Basic Static Radial Load Rating Co:71000 N; Oil Speed Rating n2:17000 rpm; Grease Speed Rating n1:12000 rpm; |
| N1952-K-M1-SP Bearing 260x360x46mm | Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:72800 N; Accessories:Two Seals & Snap-Rin; d:80.000 mm; Oil Speed Rating n2:5300 rpm; B:26.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Sealed Speed Rating n3:3000 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; |
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
HCN1022-K-PVPA-SP Bearing 110x170x28mm Video